[Asterisk-Users] TDM400P stop responding

[rich allen]

iH

i had forgotten about moving the FXO to port 1 ... am out of town so it 
will be Monday or Tuesday until i can move it and then about a day to 
know if that solves the problem. will report back then

- hcir

On Oct 8, 2004, at 3:18 AM, Michael George wrote:

> On Wed, Oct 06, 2004 at 08:53:21PM -0800, rich allen wrote:
>>
>> have a TDM400 w/ 1 FXS & 1FXO card. after about a day or so the FXO
>> stops working. after a  reboot i get the following error. to get the
>> card working again i have to shutdown, physically unplug/replug the
>> card (reboot only, power off/on does not work) any ideas what may be
>> going wrong here?
>
> Make sure your FXO is *not* on port 1 on the card...  I had a problem 
> where I
> could not get 3 days of uptime before the system would lock of the 
> card would
> freeze.  Moving the FXO from port 1 to port 4 solved that problem.
>