[Asterisk-Users] Cannot get two TE410Ps to operate correctly in
the same machine
Rich Adamson
radamson at routers.com
Mon Nov 29 08:56:37 MST 2004
> Your description makes perfect sense. My system is still getting HDLC overruns, which are
certainly a consequence of frame
> slips because the second card is not getting clocked from the external source.
>
> I come back to my basic question:
>
> How do you configure an asterisk system so that a second TE410P card recognizes an external
clock source? No matter
> what I've done the second card is always reported as "internally clocked". Configuring span 5
(the first on the second board)
> with exactly the same timing parameters as for span 1 (which works great) is not doing it.
What is the trick?
>
> Can anybody share the config files for a succesful installation with more than one TE410P
boards?
>
I don't recall from your previous postings on this topic, so I'll ask.
After config'ing span 5 in /etc/zaptel.conf, are you reloading/restarting
the drivers? (That _is_ necessary.)
Rich
More information about the asterisk-users
mailing list