[Asterisk-Users] Asterisk not startin anymore.

[Andres Junge]

Hello.
I have this problem. In my asterisk box, I was running debian woody with 
asterisk package from backports.org. Last friday I upgraded from debian 
to sarge and change from kernel 2.4.18-1-686 to kernel 2.6.8-1-686, 
rebuild zaptel kernel module and also upgrade to asterisk 1.0.2.  But 
now asterisk won't start.  Here is more info

#asterisk -vvvvvvvv
(last lines)

[chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Nov 28 14:00:30 WARNING[1077059712]: chan_zap.c:765 zt_open: Unable to 
specify channel 1: No such device
Nov 28 14:00:30 ERROR[1077059712]: chan_zap.c:6195 mkintf: Unable to 
open channel 1: No such device
here = 0, tmp->channel = 1, channel = 1
Nov 28 14:00:30 ERROR[1077059712]: chan_zap.c:9130 setup_zap: Unable to 
register channel '1'
Nov 28 14:00:30 WARNING[1077059712]: loader.c:334 ast_load_resource: 
chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
Nov 28 14:00:30 WARNING[1077059712]: loader.c:429 load_modules: Loading 
module chan_zap.so failed!

When I modprobe wcfxs I got this:

Nov 28 14:01:47 voiplab kernel: Freshmaker version: 71
Nov 28 14:01:47 voiplab kernel: Freshmaker passed register test
Nov 28 14:01:50 voiplab kernel: Timeout waiting for calibration of module 0
Nov 28 14:01:52 voiplab kernel: Timeout waiting for calibration of module 0
Nov 28 14:01:52 voiplab kernel: Proslic Failed on Second Attempt to Auto 
Calibrate
Nov 28 14:01:53 voiplab kernel: Proslic Failed on Second Attempt to 
Calibrate Manually. (Try -DNO_CALIBRATION in Makefile)
Nov 28 14:01:53 voiplab kernel: Module 0: FAILED FXS (FCC)
Nov 28 14:01:54 voiplab kernel: Module 1: Installed -- AUTO FXS/DPO
Nov 28 14:01:54 voiplab kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Nov 28 14:01:55 voiplab kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Nov 28 14:01:55 voiplab kernel: Found a Wildcard TDM: Wildcard TDM400P 
REV E/F (4 modules)

It seems that the first FXS module of my TDM22B is broken. Is that 
correct? In that case how can I disable it? Just open the case and pull 
it out? Or can I apply a configuration parameter to disable it?

Does this modules have a warranty? For how long?

Thanx in advance.
Andrés