[Asterisk-Users] Zaptel on Suse 9.0

[Ashish Shinde]

Hi,
  Thanks for the help. I actually needed to get stuff ready quick and
installed Suse9.1 instead.

Regards,
  - Ashish


On Sat, 27 Nov 2004 09:03:15 +0800, Ronald Wiplinger <ronald at elmit.com> wrote:
> Ashish Shinde wrote:
> 
> 
> 
> >Hi,
> >   I have two WCT100P cards installed on a suse 9.0 box. Installation
> >for Zaptel complains of some unresolved dependencies. The zaptel and
> >wct1xxp modules load without any errors. ztcfg give no problems.
> >
> >  The problem is when I start asterisk I get the following error and
> >asterisk shuts down
> >
> >-----------------------------------------------------------------------------------------------------
> >Nov 24 21:28:15 WARNING[18825]: chan_zap.c:765 zt_open: Unable to
> >specify channel 1: No such device or address
> >Nov 24 21:28:15 ERROR[18825]: chan_zap.c:6195 mkintf: Unable to open
> >channel 1: No such device or address
> >here = 0, tmp->channel = 1, channel = 1
> >Nov 24 21:28:15 ERROR[18825]: chan_zap.c:9139 setup_zap: Unable to
> >register channel '1-23'
> >Nov 24 21:28:15 WARNING[18825]: loader.c:334 ast_load_resource:
> >chan_zap.so: load_module failed, returning -1
> >  == Unregistered channel type 'Tor'
> >  == Unregistered channel type 'Zap'
> >Nov 24 21:28:15 WARNING[18825]: loader.c:429 load_modules: Loading
> >module chan_zap.so failed!
> >----------------------------------------------------------------------------------------------------
> >
> >
> >
> I had a similar problem, but I could solve it by:
> 
> cd /usr/src/linux
> make cloneconfig && make dep
> 
> and continued with:
> cd /usr/local/src/asterisk/zaptel/
> make clean
> make install
> 
> 
> 
> 
> >  My /etc/zaptel.conf file reads
> >
> >      loadzone=us
> >     defaultzone=us
> >     span=1,0,0,d4,b8zs
> >     bchan=1-23
> >     dchan=24
> >
> >     span=2,0,0,d4,b8zs
> >     bchan=25-47
> >     dchan=48
> >
> >  The /etc/asterisk/zapata.conf reads
> >     context = default
> >     switchtype = national
> >     signalling = pri_cpe
> >     group = 1
> >     channel => 1-23
> >
> >     context = default
> >     switchtype = national
> >     signalling = pri_cpe
> >     group = 2
> >     channel => 25-47
> >
> > I don't know if it is some configuration error, or some problem with
> >zaptel and suse9.0.
> > I would really be grateful if someone could help me in this regards.
> >
> >Thanks and regards,
> >  - Ashish Shinde
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> >
> 
> --
> Ronald Wiplinger  (CEO of ELMIT)
> http://www.elmit.com    +886 (0) 939--77-55-16
> - I'm a SpamCon Foundation Member, #694, Verify it at http://www.spamcon.org
> 
> PS: Spam prevention!
> Our system is protected with a spam prevention program.
> If you send us an e-mail, our system will send you a confirmation message back. Just reply to this confirmation message please.
> After receiving this confirmation message, our system will send the hold message (one) and all future messages (after the received confirmation message) to me without asking you again.
> 
>