[Asterisk-Users] Zaptel on Suse 9.0

Lyle Giese lyle at lcrcomputer.net
Tue Nov 30 12:24:33 MST 2004


I am running * on Suse 9.0.  What errors did you get with Zaptel relative to
the unresolved dependencies?

What is the output of ztcfg -v?

Lyle

----- Original Message ----- 
From: "Ashish Shinde" <omkarashish at gmail.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, November 25, 2004 2:24 AM
Subject: [Asterisk-Users] Zaptel on Suse 9.0


> Hi,
>    I have two WCT100P cards installed on a suse 9.0 box. Installation
> for Zaptel complains of some unresolved dependencies. The zaptel and
> wct1xxp modules load without any errors. ztcfg give no problems.
>
>   The problem is when I start asterisk I get the following error and
> asterisk shuts down
>
> --------------------------------------------------------------------------
---------------------------
> Nov 24 21:28:15 WARNING[18825]: chan_zap.c:765 zt_open: Unable to
> specify channel 1: No such device or address
> Nov 24 21:28:15 ERROR[18825]: chan_zap.c:6195 mkintf: Unable to open
> channel 1: No such device or address
> here = 0, tmp->channel = 1, channel = 1
> Nov 24 21:28:15 ERROR[18825]: chan_zap.c:9139 setup_zap: Unable to
> register channel '1-23'
> Nov 24 21:28:15 WARNING[18825]: loader.c:334 ast_load_resource:
> chan_zap.so: load_module failed, returning -1
>   == Unregistered channel type 'Tor'
>   == Unregistered channel type 'Zap'
> Nov 24 21:28:15 WARNING[18825]: loader.c:429 load_modules: Loading
> module chan_zap.so failed!
> --------------------------------------------------------------------------
--------------------------
>
>   My /etc/zaptel.conf file reads
>
>       loadzone=us
>      defaultzone=us
>      span=1,0,0,d4,b8zs
>      bchan=1-23
>      dchan=24
>
>      span=2,0,0,d4,b8zs
>      bchan=25-47
>      dchan=48
>
>   The /etc/asterisk/zapata.conf reads
>      context = default
>      switchtype = national
>      signalling = pri_cpe
>      group = 1
>      channel => 1-23
>
>      context = default
>      switchtype = national
>      signalling = pri_cpe
>      group = 2
>      channel => 25-47
>
>  I don't know if it is some configuration error, or some problem with
> zaptel and suse9.0.
>  I would really be grateful if someone could help me in this regards.
>
> Thanks and regards,
>   - Ashish Shinde
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list