[Asterisk-Users] Zaptel on Suse 9.0

[Ronald Wiplinger]

Ashish Shinde wrote:

>Hi,
>   I have two WCT100P cards installed on a suse 9.0 box. Installation
>for Zaptel complains of some unresolved dependencies. The zaptel and
>wct1xxp modules load without any errors. ztcfg give no problems.
> 
>  The problem is when I start asterisk I get the following error and
>asterisk shuts down
>
>-----------------------------------------------------------------------------------------------------
>Nov 24 21:28:15 WARNING[18825]: chan_zap.c:765 zt_open: Unable to
>specify channel 1: No such device or address
>Nov 24 21:28:15 ERROR[18825]: chan_zap.c:6195 mkintf: Unable to open
>channel 1: No such device or address
>here = 0, tmp->channel = 1, channel = 1
>Nov 24 21:28:15 ERROR[18825]: chan_zap.c:9139 setup_zap: Unable to
>register channel '1-23'
>Nov 24 21:28:15 WARNING[18825]: loader.c:334 ast_load_resource:
>chan_zap.so: load_module failed, returning -1
>  == Unregistered channel type 'Tor'
>  == Unregistered channel type 'Zap'
>Nov 24 21:28:15 WARNING[18825]: loader.c:429 load_modules: Loading
>module chan_zap.so failed!
>----------------------------------------------------------------------------------------------------
>
>  
>
I had a similar problem, but I could solve it by:

cd /usr/src/linux
make cloneconfig && make dep

and continued with:
cd /usr/local/src/asterisk/zaptel/
make clean
make install




>  My /etc/zaptel.conf file reads
>          
>      loadzone=us
>     defaultzone=us
>     span=1,0,0,d4,b8zs
>     bchan=1-23
>     dchan=24
>
>     span=2,0,0,d4,b8zs
>     bchan=25-47
>     dchan=48
> 
>  The /etc/asterisk/zapata.conf reads
>     context = default
>     switchtype = national
>     signalling = pri_cpe
>     group = 1
>     channel => 1-23
>
>     context = default
>     switchtype = national
>     signalling = pri_cpe
>     group = 2
>     channel => 25-47
>
> I don't know if it is some configuration error, or some problem with
>zaptel and suse9.0.
> I would really be grateful if someone could help me in this regards.
>
>Thanks and regards,
>  - Ashish Shinde
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>


-- 
Ronald Wiplinger  (CEO of ELMIT)
http://www.elmit.com    +886 (0) 939--77-55-16
- I'm a SpamCon Foundation Member, #694, Verify it at http://www.spamcon.org


PS: Spam prevention!
Our system is protected with a spam prevention program. 
If you send us an e-mail, our system will send you a confirmation message back. Just reply to this confirmation message please. 
After receiving this confirmation message, our system will send the hold message (one) and all future messages (after the received confirmation message) to me without asking you again.