[Asterisk-Users] Cannot get two TE410Ps to operate correctly in the same machine

[Peter Svensson]

On Thu, 25 Nov 2004, Rich Adamson wrote:

> > However, zttool reports card as "Internally Clocked". No matter how I've 
> > tried, I cannot get card 1 to clock from the external source:
> > Sync Source:        Internally clocked
> > 
> > First span on card 0 is configured just the same:
> > 
> > span=1,1,0,ccs,hdb3
> > bchan=1-15
> > dchan=16
> > bchan=17-31
> > 
> > This card gets clocked OK:
> > Sync Source:        TE410P (PCI) Card 0 Span 1
> 
> Realistically, there should only be a single external span interface 
> on your system that is used for sync source. I'm not a programmer so 
> can't verify the code might have limits built in to ensure that.

According to Marc Spencer on the bug tracker each card is clocked 
separatly. He recommended the user to contact Digium support. Support for 
the hardware is included in the price for the Digium cards.

Peter