R: [Asterisk-Users] problem with zyxel prestige 2002

Manuel Wenger manuel.wenger at ticinocom.com
Fri Nov 19 03:47:51 MST 2004


We also had this problem with the zyxel 2002. Upgrade to the latest
firmware, then it will work. Older firmwares had trouble with incoming
calls behind NAT.

-Manuel


-----Messaggio originale-----
Da: Stig Thune [mailto:stig.thune at telecoms-resources.no] 
Inviato: lunedì, 15. novembre 2004 19:16
A: Asterisk Users Mailing List - Non-Commercial Discussion
Oggetto: Re: [Asterisk-Users] problem with zyxel prestige 2002


This sounds odd.
We use the same adapter.
I will check this more..

Are u sure you have set the phone up correctly ?
And also - have to "checked the ring phone1 or phone2" on incomming
calls ?

/ Stig Henning


----- Original Message ----- 
From: "Mihkel Raba" <mihkel at virtuaal.ee>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Sunday, November 14, 2004 9:51 PM
Subject: [Asterisk-Users] problem with zyxel prestige 2002


> Hi
>
> I tried to use Zyxel Prestige 2002 VoIP Analog Telephone Adapter with 
> asterisk. Device registers both phones and i can call out. But 
> incoming calls are not working.
> Asterisk -> sip show peers shows zyxel, zyxel web interfce shows that
> devices are registered.
> But when i do incoming call to zyxel, phones do not  ring and if
> voicemail is configured, calls go
> directly to voicemail.
>
> Any suggestions ?
>
> Mihkel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041119/9b99d104/attachment.htm


More information about the asterisk-users mailing list