<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.0.4417.0">
<TITLE>R: [Asterisk-Users] problem with zyxel prestige 2002</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>We also had this problem with the zyxel 2002. Upgrade to the latest firmware, then it will work. Older firmwares had trouble with incoming calls behind NAT.</FONT></P>
<P><FONT SIZE=2>-Manuel</FONT>
</P>
<BR>
<P><FONT SIZE=2>-----Messaggio originale-----</FONT>
<BR><FONT SIZE=2>Da: Stig Thune [<A HREF="mailto:stig.thune@telecoms-resources.no">mailto:stig.thune@telecoms-resources.no</A>] </FONT>
<BR><FONT SIZE=2>Inviato: luned́, 15. novembre 2004 19:16</FONT>
<BR><FONT SIZE=2>A: Asterisk Users Mailing List - Non-Commercial Discussion</FONT>
<BR><FONT SIZE=2>Oggetto: Re: [Asterisk-Users] problem with zyxel prestige 2002</FONT>
</P>
<BR>
<P><FONT SIZE=2>This sounds odd.</FONT>
<BR><FONT SIZE=2>We use the same adapter.</FONT>
<BR><FONT SIZE=2>I will check this more..</FONT>
</P>
<P><FONT SIZE=2>Are u sure you have set the phone up correctly ?</FONT>
<BR><FONT SIZE=2>And also - have to "checked the ring phone1 or phone2" on incomming calls ?</FONT>
</P>
<P><FONT SIZE=2>/ Stig Henning</FONT>
</P>
<BR>
<P><FONT SIZE=2>----- Original Message ----- </FONT>
<BR><FONT SIZE=2>From: "Mihkel Raba" <mihkel@virtuaal.ee></FONT>
<BR><FONT SIZE=2>To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com></FONT>
<BR><FONT SIZE=2>Sent: Sunday, November 14, 2004 9:51 PM</FONT>
<BR><FONT SIZE=2>Subject: [Asterisk-Users] problem with zyxel prestige 2002</FONT>
</P>
<BR>
<P><FONT SIZE=2>> Hi</FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> I tried to use Zyxel Prestige 2002 VoIP Analog Telephone Adapter with </FONT>
<BR><FONT SIZE=2>> asterisk. Device registers both phones and i can call out. But </FONT>
<BR><FONT SIZE=2>> incoming calls are not working.</FONT>
<BR><FONT SIZE=2>> Asterisk -> sip show peers shows zyxel, zyxel web interfce shows that</FONT>
<BR><FONT SIZE=2>> devices are registered.</FONT>
<BR><FONT SIZE=2>> But when i do incoming call to zyxel, phones do not ring and if</FONT>
<BR><FONT SIZE=2>> voicemail is configured, calls go</FONT>
<BR><FONT SIZE=2>> directly to voicemail.</FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> Any suggestions ?</FONT>
<BR><FONT SIZE=2>></FONT>
<BR><FONT SIZE=2>> Mihkel</FONT>
</P>
</BODY>
</HTML>