[Asterisk-Users] Re: TDM FXS Module & caller ID
Marty Lee
marty at upstart-training.co.uk
Wed Nov 17 06:04:46 MST 2004
Marty Lee wrote:
>
> I'm having problems with an FXS module on a TDM400P card with
> asterisk telling me:
>
>
>> -- Zap/4-1 is ringing
>> Exception on 19, channel 4
>> Got event Ringer On(10) on channel 4 (index 0
>> Exception on 19, channel 4
>> Got event Ringer Off(11) on channel 4 (index 0)
>> Didn't finish Caller-ID spill. Cancelling.
>
>
> and no subsequent caller id on the handset. If I use the same
> handset on a Grandstream 286 device, the caller id stuff works
> fine.
>
> I guess that the duration of the gap between rings isn't sufficient
> for the callerid to be sent, but can't find a way of tuning that.
>
> Check the archives, and although this message appears, I couldn't find
> any resolution.
>
> Anyone able to point me in the right direction ?
>
> cheers
>
> marty
>
> (Asterisk 1.0.2 stable)
>
I've got further, by setting the tonezone in /etc/zaptel.conf to be
'us', which then delivers the caller id after the first ring, but
makes the call sound like one made to the US (not really supprising).
Is anyone aware of how to tweak the settings, so I can retain UK
call tones, but send out the callerid over the FXS port ?
I'm still guessing that it is due to the timing of the rings; I've
tried setting 'DEFAULT_CIDRINGS 2' within the chan_zap.c, as suggested
on one email thread, but that didn't solve this issue.
regards
marty
More information about the asterisk-users
mailing list