[Asterisk-Users] Marconi Sys X/TE410P configuration

[Storer, Darren]

On Wed, 10 Nov 2004 00:19:58 +0000, Steve Kennedy
<steve-asterisk at gbnet.net> wrote:
> > Hi Steve,
> 
> Hi, name rings a bell for some reason ?

Hmm, yes, I have the same feeling about your name. Ever been to
borstal? (Just kidding...)

I would have answered sooner but last week turned nasty when someone
delivered 1.2M calls in 10 minutes when they had forecast 30k calls
over 3 weeks; messy, very messy - always carry a spatula!

> Couldn't find any config data on the lists, though did pick out the
> EuroISDN stuff. Hopefully it's just a switch misconfiguration.

Here are some configs from a production server using a TE4XXP card
connected to a Marconi System X switch via ETSI Q.931 PRI  (ISDN110):

http://www.comgate.tv/Marconi_Star/zaptel.conf
http://www.comgate.tv/Marconi_Star/zapata.conf

I hope that these files help. If you still have problems why don't you
let us take a look at the configs you are using?

Regards

Darren
-- 
Darren Storer
Comgate
Telco|Internet|Broadcast