[Asterisk-Users] NAT with Linksys

Nahuel Alejandro Ramos nahuelon at gmail.com
Thu Nov 4 14:36:50 MST 2004


Mark:
  Yes, I have nat=yes on sip.conf, and other ATAs work perfectly behind nat.

David:
  If I have time I would try to upload a new firmware. But I will
search for I bit more.

Thanks you very much...

        Nahuel Ramos.


On Thu, 04 Nov 2004 15:44:39 -0500, David Filion <dfilion at dotality.com> wrote:
> Mark Phillips wrote:
> 
> 
> 
> >Do you have nat=yes in your relevant sip.conf stanza?
> >
> >
> >
> >
> >>I would look for an option that is "Block WAN Requests"  Set this to
> >>disable, then your linksys will respond to pings. Hope this helps.
> >>
> >>JB
> >>----- Original Message -----
> >>From: "Nahuel Alejandro Ramos" <nahuelon at gmail.com>
> >>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >><asterisk-users at lists.digium.com>
> >>Sent: Thursday, November 04, 2004 1:30 PM
> >>Subject: [Asterisk-Users] NAT with Linksys
> >>
> >>
> >>
> >>
> >>>Hi,
> >>>  I am living a wear thing. I am using my asterisk with all kind of
> >>>NAT / PAT / NPAT, with multiple ports on the same network address and
> >>>all works perfect.
> >>>  The problem I have been trying to solve is with a Cisco ATA behind a
> >>>Linksys NAT. The ATA's register work ok, but when I execute "sip show
> >>>peers" on the CLI I get a UNREACHABLE at the status column, and when I
> >>>try to call it, the asterisk send me to his voicemail because is
> >>>unreachable. But when the ATAs dial, the call work great.
> >>>  I have other ATAs behind other NATs (f.e. iptables) and they work
> >>>
> >>>
> >>perfectly.
> >>
> >>
> >>>  I have tried using the DMZ option on my linksys (putting the ATA
> >>>private IP) but I stay having the problem.
> >>>  Could anyone give me a guide to search for a solution. I have been
> >>>googleing but I could not find a solution.
> >>>  Thank you very much.
> >>>
> >>>        Nahuel Ramos.
> >>>_______________________________________________
> >>>Asterisk-Users mailing list
> >>>Asterisk-Users at lists.digium.com
> >>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>To UNSUBSCRIBE or update options visit:
> >>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>
> >>>
> >>>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>
> >
> >
> >G7LTT/KC2ENI
> >Mark Phillips
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >
> >
> >
> If you're really adventurous you could also change your firmware from
> the default to the one from sveasoft.
> It corrected my problems when I couldn't get the Linksys firmware to
> play nice.
> 
> David
> 
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list