[Asterisk-Users] NAT with Linksys

[David Filion]

Mark Phillips wrote:

>Do you have nat=yes in your relevant sip.conf stanza?
>
>
>  
>
>>I would look for an option that is "Block WAN Requests"  Set this to
>>disable, then your linksys will respond to pings. Hope this helps.
>>
>>JB
>>----- Original Message -----
>>From: "Nahuel Alejandro Ramos" <nahuelon at gmail.com>
>>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>><asterisk-users at lists.digium.com>
>>Sent: Thursday, November 04, 2004 1:30 PM
>>Subject: [Asterisk-Users] NAT with Linksys
>>
>>
>>    
>>
>>>Hi,
>>>  I am living a wear thing. I am using my asterisk with all kind of
>>>NAT / PAT / NPAT, with multiple ports on the same network address and
>>>all works perfect.
>>>  The problem I have been trying to solve is with a Cisco ATA behind a
>>>Linksys NAT. The ATA's register work ok, but when I execute "sip show
>>>peers" on the CLI I get a UNREACHABLE at the status column, and when I
>>>try to call it, the asterisk send me to his voicemail because is
>>>unreachable. But when the ATAs dial, the call work great.
>>>  I have other ATAs behind other NATs (f.e. iptables) and they work
>>>      
>>>
>>perfectly.
>>    
>>
>>>  I have tried using the DMZ option on my linksys (putting the ATA
>>>private IP) but I stay having the problem.
>>>  Could anyone give me a guide to search for a solution. I have been
>>>googleing but I could not find a solution.
>>>  Thank you very much.
>>>
>>>        Nahuel Ramos.
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>      
>>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>
>
>G7LTT/KC2ENI
>Mark Phillips
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>  
>
If you're really adventurous you could also change your firmware from 
the default to the one from sveasoft.
It corrected my problems when I couldn't get the Linksys firmware to 
play nice.

David