[Asterisk-Users] NAT with Linksys

[David Filion]

Nahuel Alejandro Ramos wrote:

>Mark:
>  Yes, I have nat=yes on sip.conf, and other ATAs work perfectly behind nat.
>
>David:
>  If I have time I would try to upload a new firmware. But I will
>search for I bit more.
>
>Thanks you very much...
>
>        Nahuel Ramos.
>
>
>On Thu, 04 Nov 2004 15:44:39 -0500, David Filion <dfilion at dotality.com> wrote:
>  
>
>>Mark Phillips wrote:
>>
>>
>>
>>    
>>
>>>Do you have nat=yes in your relevant sip.conf stanza?
>>>
>>>
>>>
>>>
>>>      
>>>
>>>>I would look for an option that is "Block WAN Requests"  Set this to
>>>>disable, then your linksys will respond to pings. Hope this helps.
>>>>
>>>>JB
>>>>----- Original Message -----
>>>>From: "Nahuel Alejandro Ramos" <nahuelon at gmail.com>
>>>>To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>>>><asterisk-users at lists.digium.com>
>>>>Sent: Thursday, November 04, 2004 1:30 PM
>>>>Subject: [Asterisk-Users] NAT with Linksys
>>>>
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>>>Hi,
>>>>> I am living a wear thing. I am using my asterisk with all kind of
>>>>>NAT / PAT / NPAT, with multiple ports on the same network address and
>>>>>all works perfect.
>>>>> The problem I have been trying to solve is with a Cisco ATA behind a
>>>>>Linksys NAT. The ATA's register work ok, but when I execute "sip show
>>>>>peers" on the CLI I get a UNREACHABLE at the status column, and when I
>>>>>try to call it, the asterisk send me to his voicemail because is
>>>>>unreachable. But when the ATAs dial, the call work great.
>>>>> I have other ATAs behind other NATs (f.e. iptables) and they work
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>perfectly.
>>>>
>>>>
>>>>        
>>>>
>>>>> I have tried using the DMZ option on my linksys (putting the ATA
>>>>>private IP) but I stay having the problem.
>>>>> Could anyone give me a guide to search for a solution. I have been
>>>>>googleing but I could not find a solution.
>>>>> Thank you very much.
>>>>>
>>>>>       Nahuel Ramos.
>>>>>_______________________________________________
>>>>>Asterisk-Users mailing list
>>>>>Asterisk-Users at lists.digium.com
>>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>To UNSUBSCRIBE or update options visit:
>>>>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>_______________________________________________
>>>>Asterisk-Users mailing list
>>>>Asterisk-Users at lists.digium.com
>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>To UNSUBSCRIBE or update options visit:
>>>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>G7LTT/KC2ENI
>>>Mark Phillips
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>To UNSUBSCRIBE or update options visit:
>>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>>
>>>
>>>
>>>      
>>>
>>If you're really adventurous you could also change your firmware from
>>the default to the one from sveasoft.
>>It corrected my problems when I couldn't get the Linksys firmware to
>>play nice.
>>
>>David
>>
>>
>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>  
>
NP.  I ended up using it because I could not get past the firmware in my 
wrt54g.  The 3rd party firmware worked right away.

David.