[Asterisk-Users] supposable timing problem with TE100P

[Peter Svensson]

On Thu, 4 Nov 2004, Kurt Bauer wrote:

> > Is your timing source set correctly? If you are connecting to the pstn
> > the  pstn connection should be the primary timing source.
> 
> connection is to a Ericsson MD110 wich is set as network, * is set as CPE.

Have you set the span as the timing source? (second number in the span 
line in zaptel.conf).

> >
> > What does the missed interrupts counter in "cat cat /proc/zaptel/1" say?
> 
> cat /proc/zaptel/1
> Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS
> 
>            1 WCT1/0/1 Clear (In use)
>            2 WCT1/0/2 Clear (In use)
>            3 WCT1/0/3 Clear (In use)
>            4 WCT1/0/4 Clear (In use)

Is there no IRQ miss counter for the E100P card? 

Peter