[Asterisk-Users] supposable timing problem with TE100P

Kurt Bauer bauer at cc.univie.ac.at
Fri Nov 5 01:37:18 MST 2004



--On Thursday, November 04, 2004 04:41:53 PM +0100 Peter Svensson 
<psvasterisk at psv.nu> wrote:

> On Thu, 4 Nov 2004, Kurt Bauer wrote:
>
>> > Is your timing source set correctly? If you are connecting to the pstn
>> > the  pstn connection should be the primary timing source.
>>
>> connection is to a Ericsson MD110 wich is set as network, * is set as
>> CPE.
>
> Have you set the span as the timing source? (second number in the span
> line in zaptel.conf).
It was 0, I changed it to 1, which seems to work better, but I have to 
check the settings of the other side with our telephony guys

>
>> >
>> > What does the missed interrupts counter in "cat cat /proc/zaptel/1"
>> > say?
>>
>> cat /proc/zaptel/1
>> Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS
>>
>>            1 WCT1/0/1 Clear (In use)
>>            2 WCT1/0/2 Clear (In use)
>>            3 WCT1/0/3 Clear (In use)
>>            4 WCT1/0/4 Clear (In use)
>
> Is there no IRQ miss counter for the E100P card?

??? I don't know.

Thanks,
Kurt



More information about the asterisk-users mailing list