[Asterisk-Users] problem with configuration.

[Sean Cheesman]

The answer is in the error....  use FXS signalling.  replace fxo_ks with
fxs_ks.  

Sean

-----Original Message-----
From: vozip [mailto:vozip at startwave.com] 
Sent: Tuesday, March 30, 2004 2:31 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] problem with configuration.
Importance: High


Hi, 

When i run the asterisk with my FXO x100p and configure:
vi /etc/zaptel.conf

fxoks=1
loadzone=us
defaultzone=us

# vi /etc/asterisk/zapata.conf

[channels]
 
busydetect=1
busycount=7
 
relaxdtmf=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
 
usecallerid=yes
 
echocancel=yes
echocancelwhenbridged=yes
 
rxgain=0.0
txgain=0.0
 
group=1
pickupgroup=1-4
 
immediate=no
 
context=bell
 
callerid=asreceived
channel=1
 
context=home
 
group=1
signalling=fxo_ks
mailbox=2468
callerid="Phone 1" <2468>
channel=1


AND RUN ZTCFG.


root at ariadna:/etc/asterisk# ztcfg -vv

Zaptel Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)

1 channels configured.

ZT_CHANCONFIG failed on channel 1: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?



ANY IDEAS.!

CHEERS.!

VOZIP


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users