[Asterisk-Users] G726 not working ?

[Bill Hamel]

Hi,

I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of
this morning 3/30/04 of asterisk, zap and libpri.

The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced".

When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I
can see:

[format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data)
  == Registered file format g726-40, extension(s) g726-40
  == Registered file format g726-32, extension(s) g726-32
  == Registered file format g726-24, extension(s) g726-24
  == Registered file format g726-16, extension(s) g726-16

I 'Ass'ume this indicates that g726 is installed..

So in my sip.conf I put many variations of what I thought should go in there,
finally includeing (to no avail):

disallow=all
allow=g726-40
allow=g726-32
allow=g726-24
allow=g726-16
allow=g726
allow=ima-adpcm

(Also tried G.726-xx etc... ) And none seem to work because when I dial out I
get

Mar 30 15:49:29 WARNING[-1137677392]: chan_sip.c:2128 process_sdp: No compatible
codecs!

I must not be putting the correct "allow=" value in sip.conf or possibly missing
something. 

Can anyone point me in the right direction ?

Thanks
-bh


-- 


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

-- 
This message has been scanned for viruses and
dangerous content by the Bugs.Hamel.Net MailScanner, 
and appears to be clean.