[Asterisk-Users] Call waiting

[Ed Rubright]

You need to send a hook flash to the PSTN line attached to the X100P.  This
is done by:
 
hook-flash then *0
 
You'll need to have 3way calling enabled for it to work.
 
NOTE:  This info can be found in the wiki pages:
http://www.voip-ino.org/wiki-Asterisk
 
Ed

  _____  

From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Simon Brown
Sent: Monday, March 22, 2004 7:28 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Call waiting


I have a problem with call waiting which I cannot find an answer for in any
of the information that I have searched through online.  I cannot find
anything in the list archives either.
 
My * server is connected to a PSTN line with an X100P.  I have a call
waiting service on this PSTN line which requires a hook flash signal to swap
calls.
 
I have Cisco 7940 phones working with my * server.  When on an outside call
and another outside call comes in, I can hear the call waiting indicator,
but cannot find any way of swapping calls (sending a hook flash signal
through the X100P).
 
Any help would be greatly appreciated.
 
Simon Brown
-----
This mail was content checked for malicious code and viruses
by GFI MailSecurity.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040322/3c98a472/attachment.htm