[Asterisk-Users] ztdummy

[Zac Amsler]

Hey all, I have an issue with compiling zaptel on my server.

 

I have a debian server with 2.6.4 kernel.

 

I am getting some errors when I try to load the module.

 

Installing module ztdummy. If the device isn't there, or isn't configured
correctly, this could cause your system to pause for up to a minute.

 

FATAL: Error inserting ztdummy (/lib/modules/2.6.4/misc/ztdummy.ko): Unknown
symbol in module, or unknown parameter (see dmesg)

FATAL: Error running install command for ztdummy

 

Installation failed.

 

Please press ENTER when you are ready to continue.

 

I have compiled zaptel as::

 

Make clean

Make linux26

Make install

 

Does anyone have any thoughts??

 

 

Zac Amsler

 

  _____  

From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Ed Rubright
Sent: Monday, March 22, 2004 9:46 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Call waiting

 

You need to send a hook flash to the PSTN line attached to the X100P.  This
is done by:

 

hook-flash then *0

 

You'll need to have 3way calling enabled for it to work.

 

NOTE:  This info can be found in the wiki pages:
http://www.voip-ino.org/wiki-Asterisk

 

Ed

 

  _____  

From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Simon Brown
Sent: Monday, March 22, 2004 7:28 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Call waiting

I have a problem with call waiting which I cannot find an answer for in any
of the information that I have searched through online. I cannot find
anything in the list archives either.

 

My * server is connected to a PSTN line with an X100P. I have a call waiting
service on this PSTN line which requires a hook flash signal to swap calls.

 

I have Cisco 7940 phones working with my * server. When on an outside call
and another outside call comes in, I can hear the call waiting indicator,
but cannot find any way of swapping calls (sending a hook flash signal
through the X100P).

 

Any help would be greatly appreciated.

 

Simon Brown

-----
This mail was content checked for malicious code and viruses
by GFI MailSecurity.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040322/e751c348/attachment.htm