[Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR)

[James Coberly]

Check out : http://www.voip-info.org/wiki-Asterisk+Avaya

Depending upon the card you are using in the Avaya,  you should set it up as
a tie trunk on the Avaya side.

James-



----- Original Message ----- 
From: "Jeb Campbell" <jebc at c4solutions.net>
To: <asterisk-users at lists.digium.com>
Sent: Saturday, March 20, 2004 7:36 PM
Subject: [Asterisk-Users] T100P T1 problem (Avaya -> asterisk IVR)


> Hello all,
> I'm having a problem with a T1 connection to a Avaya PBX (asterisk is
> an IVR).
> I could not get pri working and now I'm simply trying to get asterisk
> working with fxs_ks.
>
> Questions:
> 1. Is there anyway to troubleshoot or see what is being sent on the T1.
> zttool shows no errors, and the Avaya rings the t1 if wct1xxp is
> loaded, and gives
> busy if it is not loaded -- so I think something is being sent down
> the line, I just
> don't know what it is (asterisk -vvvvvc shows nothing)
>
> 2. Is there anyone with Avaya PBX -> asterisk experience on the list?
> I'm remote, but I can
> login -- I just don't know what commands can troubleshoot the
> connection.
>
> Config:
> zaptel.conf (relevant section)
> span=1,1,0,esf,b8zs
> fxsks=1-24
>
> zapata.conf
> [channels]
> context = demo
> switchtype = national
> signalling = fxs_ks
> group = 1
> channel => 1-24
>
> Thanks for any time and help
>
> Jeb Campbell
> jebc at c4solutions.net
> Cell: 865-385-1437
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users