[Asterisk-Users] PRI errors blocking Asterisk

[Nicolas Bougues]

On Thu, Mar 11, 2004 at 04:48:42PM -0000, Scott Stingel wrote:
> Hi Nichoas-
> 
> Are you are getting lots of frame re-transmission messages in
> /var/log/asterisk/messages as well?
> 

No.

I get a few of these messages, though :

Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: Unknown error 500
Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2 
Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: Unknown error 500
Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2

Note that I'm not sure about the timing settings on my board. The
board has (currently) 3 E1 spans connected, from 3 different
operators, all of them providing a clock (no guarantee they are
synchronised).

Upon module loading, the driver says 

TE410P: Timing from source 0

I chose one (quite random) E1 span as a primary sync source in
zaptel.conf

SPAN 3: Primary Sync Source

I'm not sure how this setting is used. Do I really have to set one ? 

--
Nicolas Bougues
Axialys Interactive