[Asterisk-Users] PRI errors blocking Asterisk

[Scott Stingel]

could you please post your zaptel.conf?

You're right, maybe this has something to do with your clock source or
timing

Thanks

Scott M. Stingel 
Emerging Voice Technology Inc.
Palo Alto, California and London, England

Email:          scott "at" evtmedia.com  
URL:            www.evtmedia.com  

 

>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com 
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
>Nicolas Bougues
>Sent: Thursday, March 11, 2004 8:06 PM
>To: asterisk-users at lists.digium.com
>Subject: Re: [Asterisk-Users] PRI errors blocking Asterisk
>
>On Thu, Mar 11, 2004 at 04:48:42PM -0000, Scott Stingel wrote:
>> Hi Nichoas-
>> 
>> Are you are getting lots of frame re-transmission messages in
>> /var/log/asterisk/messages as well?
>> 
>
>No.
>
>I get a few of these messages, though :
>
>Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: 
>Unknown error 500
>Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2 
>Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: 
>Unknown error 500
>Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2
>
>Note that I'm not sure about the timing settings on my board. The
>board has (currently) 3 E1 spans connected, from 3 different
>operators, all of them providing a clock (no guarantee they are
>synchronised).
>
>Upon module loading, the driver says 
>
>TE410P: Timing from source 0
>
>I chose one (quite random) E1 span as a primary sync source in
>zaptel.conf
>
>SPAN 3: Primary Sync Source
>
>I'm not sure how this setting is used. Do I really have to set one ? 
>
>--
>Nicolas Bougues
>Axialys Interactive
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>