[Asterisk-Users] IAXy config samples

[Eugen Cristea]

Thanks to Florian and Scott,

I cvs the latest and used your instructions.
It worked perfect.Digium should include these
instructions as an alternative in their guide
for IAXy.
Thanks again,
Eugen
 --- Scott Petersen <scott_j1 at slal.net> wrote: 
> On Thu, Jul 29, 2004 at 10:21:17PM +1200, Eugen
> Cristea wrote:
> > Asterisk refuses to register IAXy.I am using the
> "IAXY
> > Configuration Guide" that comes with the IAXy.
> > The guide does not say anything about the
> [general]
> > section in the iax.conf and the handbook has no
> IAXy
> > example.
> > Any hints?
> > Thanks
> > 
> 
> Did you provision the IAXy to give it a server,
> username, password etc? There are two ways to do
> this, one is using the provisioning tool mentioned
> in the guide the other is to use the provisioning
> built in to asterisk.
> 
> There is a config file in more recent builds of
> asterisk called iaxprov.conf. In there you put a
> template entry such as:
> 
> [default]
> port=4569
> server=192.168.1.103
> language=en
> codec=ulaw
> flags=register
> tos=lowdelay
> 
> You then add an entry for each IAXy device that you
> want to provision and reference this template. Any
> entries in the default template will be picked up.
> 
> [backoffice]
> user=backoffice
> pass=supersecret
> template=default
> 
> Once that is set up and you have reloaded the config
> files, you can go to the asterisk console and type:
> 
> iax2 provision <ip of iaxy> backoffice
> 
> You will, of course, have to determine what the IP
> address of the IAXy is in the first place. This can
> be easy or hard depending on if you have access to
> the DHCP logs for your network. For more information
> on this command you can do: help iax2 provision
> 
> Once you power cycle the IAXy it will attempt to
> connect to the asterisk server at 192.168.1.103 and
> register with the username and password. This means
> that you will have to have an entry in your iax.conf
> file that matches. For example:
> 
> [backoffice]
> type=friend
> host=dynamic
> context=default
> secret=supersecret
> disallow=all
> allow=ulaw
> 
> I hope this helps
> 
> Cheers
> Scott Petersen
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
>  

Find local movie times and trailers on Yahoo! Movies.
http://au.movies.yahoo.com