[Asterisk-Users] Avaya/Lucent Definity -> Asterisk interop question

Scott Stingel scott at evtmedia.com
Thu Aug 5 09:16:37 MST 2004


>>When I load wct1xxp and zaptel and do a ztcfg -v all channels come up, but
I get a pulsing orange light. (normal ?) On the Definity side, the 464 has
red lights pulsing on 2 and 4.

Hi-

Better post your zaptel.conf and zapata.conf.  I'm not a Definity expert,
but something's wrong.  Maybe, for example, you should be configured as
signalling=pri_net, rather than pri_cpe.

Also, I wonder if you should be using a T1 cross-over cable - you should get
a green light on the T100P if asterisk is up and things are configured
correctly.   A crossover cable is wired as follows:

1 <--> 4
2 <--> 5
4 <--> 1
5 <--> 2

Regards
Scott Stingel 


Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
Robert.Kelly at ebimed.com
Sent: Thursday, August 05, 2004 8:27 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Avaya/Lucent Definity -> Asterisk interop question







More information about the asterisk-users mailing list