[Asterisk-Users] Strange T1 Problem - FIXED plus new question

[Ryan Thrash]

First, check zapata.conf to see what is in there. Next, I've not heard 
of any luck with the name portion on T1s, but the number can be changed 
for us.

HTH,
Ryan

On Apr 16, 2004, at 10:30 AM, Mike Machado wrote:

>
>>>
>> You can usually get CLI on an E&M robbed bit T1 by configuring it 
>> right.
>> Instead of just sending you the DNIS as a string of DTMF they usually
>> send *<cli>*<dnis>*. The DNIS and CLI may be swapped, and there may be
>> less than 3 *s in the string - wonderful consistency, eh? :-\
>
> I am getting CallerID and DNIS on the inbound calls. What I really need
> is to be able to set callerID on outbound calls. I am trying to set the
> callerid using SetCIDNum just before using Dial on a zap channel, but 
> it
> looks like the switch guys have it set to always stamp the same 
> callerID
> on the my outbound calls no matter what I put in SetCIDNum or what
> channel on the T1 I use. Is this a misconfiguration of the switch or a
> limitation of the signaling protocol? If its the switch, can you give 
> me
> any pointers as to what I could ask them to look for, or if its the
> protocol, do you know any other signaling protocol that lets me set
> outbound callerID (besides PRI)?