[Asterisk-Users] Budgetone + NAT: Firmware Version?

[Uriel Carrasquilla]

Is there anyway to prevent the BudgetTone from just doing a BIOS upgrade
without consulting?
I would be scared if my PC upgraded its BIOS at will.
Uriel

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Andrew
Kohlsmith
Sent: Saturday, September 27, 2003 8:11 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Budgetone + NAT: Firmware Version?


> All I can suggest is to just go over your settings and just make sure
> that they are all correct and that nothing was "accidentally" changed
> during the upgrade..

I'd go one further than that and have all the phones go to factory default,
and then re-set all the parameters to what you want them to be.  Perhaps
locations changed in the NVRAM and while it seems to look like it's
configured right, it isn't.

Think of it as a PC BIOS upgrade -- you must do a factory default reset and
then set your parameters again or you might end up with mostly working but
infuriating little problems.

Regards,
Andrew
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users