[Asterisk-Users] Budgetone + NAT: Firmware Version?

[John Brown (CV)]

Yes, set the TFTP IP to 0.0.0.0



On Sat, Sep 27, 2003 at 11:10:50PM -0400, Uriel Carrasquilla wrote:
> Is there anyway to prevent the BudgetTone from just doing a BIOS upgrade
> without consulting?
> I would be scared if my PC upgraded its BIOS at will.
> Uriel
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Andrew
> Kohlsmith
> Sent: Saturday, September 27, 2003 8:11 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Budgetone + NAT: Firmware Version?
> 
> 
> > All I can suggest is to just go over your settings and just make sure
> > that they are all correct and that nothing was "accidentally" changed
> > during the upgrade..
> 
> I'd go one further than that and have all the phones go to factory default,
> and then re-set all the parameters to what you want them to be.  Perhaps
> locations changed in the NVRAM and while it seems to look like it's
> configured right, it isn't.
> 
> Think of it as a PC BIOS upgrade -- you must do a factory default reset and
> then set your parameters again or you might end up with mostly working but
> infuriating little problems.
> 
> Regards,
> Andrew
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users