[Asterisk-Users] built in dial functions?

[Martin Pycko]

The implementation of *72 is done for FXS port (the one that gives the
dialtone). However you could implement that with some extensions.conf
logic.

regards
Martin

On Sat, 20 Sep 2003, Rich Adamson wrote:

> Martin,
>
> That makes sense... but how would one actually use "*72#", as an example,
> when * has two x100p FX ports? i.e, can one enable call forwarding on one
> fx port and not the other?
>
> If I want to call forward my extension (say extn 3000) to extn 3001, is
> there a way for the user to do that without changing config files?
>
> Rich
> ------------------------
> > These functions are implemented only for chan_zap (zaptel hardware) and
> > work for FXS/FXO ports. Exception is *8 (remote call pickup) as far as I
> > know.
> >
> > regards
> > Martin
> >
> > On Fri, 19 Sep 2003, Rich Adamson wrote:
> >
> > > Someone recently posted the following list as functions built into *
> > >
> > > *0#  sends flash
> > > *8#  remote call pickup (pickup phone in your group)
> > > *67# disable caller id
> > > *70# no call waiting
> > > *78# do not disturb on
> > > *79# do not disturb off
> > > *72# enable call forwarding
> > > *73# disable call forwarding
> > > *82# enable callerid
> > >
> > > I'm running a CVS from a couple of weeks ago with multiple C7960's,
> > > snom 200, ata186, links to fwd and iaxtel, two x100p incoming fx
> > > lines, MoH, etc. Everything attempted to date is now working fine.
> > >
> > > However, testing the above list tends to suggest they don't work (or
> > > at least they don't work as I would expect them to.)
> > >
> > > Example, from a C7960 I dial *78# and hang up. From another sip phone
> > > I Dial that extenstion and the 7960 rings. I expected the call to roll
> > > over to voicemail or something. Am I missing something here, or are
> > > these functions not expected to work on a per-extension basis?
> > >
> > > I was assuming (probably incorrectly) these functions were custom
> > > calling features implemented within * for all extensions. Are my
> > > assumptions wrong or do I have to implement something for these to
> > > work?
> > >
> > > TIA,
> > > Rich
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> ---------------End of Original Message-----------------
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>