[Asterisk-Users] can't use 2 controllers

[Simone Vasoli (BK s.r.l.)]

I checked the same link
(http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO), and the two
fritzcards work when I receive calls, but when I make a call (or more
calls), asterisk only uses my second controller 
Il gio, 2003-09-04 alle 11:53, Marian Danisek ha scritto:
> Dňa Št, 2003-09-04 at 11:40, Jamie Neil napísal:
> > Simone Vasoli (BK s.r.l.) wrote:
> > > Hi,
> > > when I make a call, chan_capi always uses controller 2, and never uses
> > > controller 1 (so I have 4 lines for incoming calls, but only 2 lines
> > > instead of 4 for outgoing calls).
> > > 
> > > this is with 2 AVM Fritz cards PCI. 
> > 
> > You can only use one Fritz PCI card per box due to a limitation built 
> > into the AVM CAPI driver.
> > 
> check this link - is describe how to use more than one fcpci in pc. I
> personally use 3 cards im my computers, without problems...
> 
> http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO
> 
> > However you can get around this by hacking the (binary) fcpci kernel 
> > module and changing the name of second and subsequent modules. I haven't 
> > tried it personally, but I think there are several people who are using 
> > this technique sucessfully :).
> > 
> > Just in case anyone is interested, AVM also say that you can't use the 
> > Fritz card and the B1 card in the same box. However I have found it 
> > seems to work fine provided the B1 CAPI driver is loaded *after* the 
> > Fritz driver.
-- 
_______________________________
Simone Vasoli
BK s.r.l. - Brain and Knowledge

e-mail: simone.vasoli at b-k.it
cell: +39 348 0830539
tel: 0187 1874200
_______________________________