[Asterisk-Users] can't use 2 controllers

[Simone Vasoli (BK s.r.l.)]

I did as you tell me, infact both controllers works (I receive incoming
calls in both channels). The problem is when I want to make 3 calls, the
first and the second are controlled by the 2 controller, but the third
too (but obviously all the channels are busy).
How can I say to asterisk to use my first controller?
Thank you...
Il gio, 2003-09-04 alle 11:40, Jamie Neil ha scritto:
> Simone Vasoli (BK s.r.l.) wrote:
> > Hi,
> > when I make a call, chan_capi always uses controller 2, and never uses
> > controller 1 (so I have 4 lines for incoming calls, but only 2 lines
> > instead of 4 for outgoing calls).
> > 
> > this is with 2 AVM Fritz cards PCI. 
> 
> You can only use one Fritz PCI card per box due to a limitation built 
> into the AVM CAPI driver.
> 
> However you can get around this by hacking the (binary) fcpci kernel 
> module and changing the name of second and subsequent modules. I haven't 
> tried it personally, but I think there are several people who are using 
> this technique sucessfully :).
> 
> Just in case anyone is interested, AVM also say that you can't use the 
> Fritz card and the B1 card in the same box. However I have found it 
> seems to work fine provided the B1 CAPI driver is loaded *after* the 
> Fritz driver.
-- 
_______________________________
Simone Vasoli
BK s.r.l. - Brain and Knowledge

e-mail: simone.vasoli at b-k.it
cell: +39 348 0830539
tel: 0187 1874200
_______________________________