[Asterisk-Users] ISDN

[Jay Tyndall]

Stripmsd is commented out, problem still occurs.
Does this simply use ATDT to dialout ?

When I attempt to dialout using minicom it comes back with "NO MSN/EAZ"
Looks like I may need to issue another AT Command to the netjet to set the 
MSN...

Has anyone encountered this before?

Jay

Message: 10
Date: Wed, 3 Sep 2003 07:35:02 +0200 (CEST)
From: Jac Kersing <j.kersing at the-box.com>
To: Jay Tyndall <asterisk at tyndall.id.au>
Cc: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com>
Subject: Re: [Asterisk-Users] ISDN
Reply-To: asterisk-users at lists.digium.com
 On Wed, 3 Sep 2003, Jay Tyndall wrote:

> I am using a Netjet-s ISDN Card, and am having some trouble dialling out 
> (Incoming Works Fine).
...
> I get the following when diallingout:
> -- Starting simple switch on 'Zap/2-1'
> -- Executing Dial("Zap/2-1", "Modem/ttyI0/04XXXXXXXX||Ttm") in new
 Check the line 'stripmsd=1'. If the number to be dialed does not need to
have the most significant digit stripped this line needs to be
commented/removed in order to dial a valid number. (with stripmsd active
the number dialed in your case would be 4XXXXXXXX)
 Regards,
 Jac