[Asterisk-Users] Help Loading a TDM card!!

[Rafael Gonzalez Lomeña]

Hi all,

  I do have the same problem.

  Does this problem appear with the last versions of TDM's board (TDMx0B)?
  I have seen a bug in "feedback" state (see
http://bugs.digium.com/bug_view_page.php?bug_id=0000087), but the
"description" it's not equal.


  I work with:
    Linux:    "Debian woody"
    Kernel    2.4.20
    gcc:        2.95.4
    Hardware:
                        P-IV 2 GHz  + 256 Mb
                        Motherboard  DFI AD77 Infinity
    Digium's Boards:
                        X100P
                        TDM10B

   Any idea ??


bye.






----- Original Message -----
From: "WipeOut" <wipe_out at lycos.co.uk>
To: <asterisk-users at lists.digium.com>
Sent: Friday, October 03, 2003 8:17 PM
Subject: [Asterisk-Users] Help Loading a TDM card!!


> Is there anything special needed to load up a TDM10B card??
>
> I got the card today.. Took it from the box, put it into a PCI slot..
> connected the power to the card and booted the PC..
>
> I have removed the X100P to avoid confusion and I have the following in
> the config files..
> in /etc/zaptel.conf
>
> # For the X100P
> #fxsks=1
> # For the TDM10B
> fxoks=1
>
> in /etc/asterisk/zapata.conf
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> echocancel=yes
> echocancelwhenbridged=yes
> callprogress=yes
> callgroup=1
> pickupgroup=1
> relaxdtmf=yes
>
> ;X100P - FXO PCI card
> ;signalling = fxs_ks
> ;channel => 1
>
> ;TDM10B FXS device
> context=local
> signalling = fxo_ks
> channel => 1
>
> When I boot the PC it does NOT show an added card/device when "kudzu"
ran..
>
> No LED's light up..
>
> When I try to load the driver with init script..
>
> [root at dev02 root]# /etc/init.d/zaptel start
> Loading zaptel framework:                                  [  OK  ]
> Loading zaptel hardware modules:
> Running ztcfg:  ZT_CHANCONFIG failed on channel 1: No such device or
> address (6)
>                                                            [FAILED]
>
> dmesg has this to say..
>
> Zapata Telephony Interface Registered on major 196
> Specify address with base=0xNNNNN
> Registered Tormenta2 PCI
>
> If I try with modprobe..
>
> [root at dev02 root]# modprobe wcfxs
> /lib/modules/2.4.20-20.9/misc/wcfxs.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20-20.9/misc/wcfxs.o: insmod
> /lib/modules/2.4.20-20.9/misc/wcfxs.o failed
> /lib/modules/2.4.20-20.9/misc/wcfxs.o: insmod wcfxs failed
>
> dmesg says..
>
> Zapata Telephony Interface Registered on major 196
> Zapata Telephony Interface Unloaded
>
> Have updated to very latest CVS as well..
>
> Anyone got any ideas??
>
> Later..
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users