[Asterisk-Users] New DIAX - version 0.9.4 - a big step forward - available for download

Andy Hester cgadmin at conserogroup.com
Mon Nov 24 19:02:07 MST 2003


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Steven Sokol
> Sent: Monday, November 24, 2003 5:46 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] New DIAX - version 0.9.4 - a big step
> forward - available for download
>
>
> Dan,
>
> I have been working with the new version and have discovered a strange
> issue.  When I place a call from a DIAX phone, all seems to generally
> work properly.  However, calls placed from either of my SIP agents
> (Grandstream 101 hardphone and X-PRO softphone) or from the PSTN via
> X100P often fail to connect.

I had a similar experience when I upgraded to 0.9.4.  i was running a cvs
version from late october. blew away my src tree and cvs checkout resolved
it.  Maybe something related to IAX2.

HTH,
Andy


>
> This is especially true if DIAX has previously received a call, and that
> call has been disconnected from the remote end.
>
> I have watched the Gastman (graphical asterisk manager) application, and
> my own Call Manager application and both indicate that the system _is_
> ringing the DIAX channel.  The DIAX just never rings, or changes to a
> state where the user can answer the incoming call.
>
> A few experiments:
>
> I.
> When the DIAX hangs up the call (is the _first_ party to hang up) the
> call is terminated cleanly in all tests.  When the remote party (the GS
> or XTEN) breaks the connection, the GS does not always drop the
> connection immediately (though the Manager shows the call being torn
> down and both parties dropping out).  When this occurs the DIAX will not
> ring another incoming call -- it requires a restart first.
>
> II.
> This does not always happen.  Sometimes the DIAX will stop responding
> even if it properly hangs up.  Also, sometimes it takes several calls
> before DIAX stops responding.
>
> III.
> Even if DIAX has stopped responding to incoming calls, it is still
> capable of making outbound calls, apparently without any problem.
>
> IV.
> Even when DIAX doesn't immediately detect the handup (or respond to the
> hangup event) and it is manually hung up after the call is torn down, it
> is _sometimes_ still capable of receiving incoming calls.
>
> Could this have something to do with my configuration?  For what it's
> worth, I don't see any errors in the Asterisk log.
>
> Thanks
>
> Steve
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list