[Asterisk-Users] FXO card still won't pick up...

[Mark Spencer]

"show channels" and "zap show channel <foo>" should be helpful.  Find me
on IRC if worst comes to worst.

Mark

On Wed, 19 Nov 2003, Matt Lawson wrote:

> I recently updated (fresh checkout) to the newest zaptel and Asterisk.
>  The one I was using before was a couple of months old.
>
> After updating, my zap channels don't work.  They won't pick up incoming
> calls or dial out.  When I try to dial out I get:
>
>     -- Executing Dial("SIP/3064-564c", "Zap/g1/ww954.......") in new stack
> NOTICE[245776]: File app_dial.c, Line 698 (dial_exec): Unable to create
> channel of type 'Zap'
>   == Everyone is busy at this time
>
> When I try to call in, usually nothing happens.  One time it answered
> and Asterisk acted like it was going through the dial plan steps, but on
> the phone I never heard anything.  It just hung up immediately.  After a
> couple more seconds Asterisk noticed the hangup and stopped its dial plan.
>
> chan_zap.so loads OK, and I can do this:
>
> *CLI> zap show channels
> Chan. Num. Extension  Context    Language   MusicOnH
>   1            incoming31 en
>   2            incoming31 en
>
> Here's an exceprt from when Asterisk starts:
>
>  [chan_local.so] => (Local Proxy
> Channel)
>
>  == Registered channel type 'Local' (Local Proxy Channel
> Driver)
>
> [chan_phone.so] => (Linux Telephony API
> Support)
>
>  == Parsing '/etc/asterisk/phone.conf':
> Found
>
> == Registered channel type 'Phone' (Standard Linux Telephony API
> Driver)
> [chan_oss.so] => (OSS Console Channel
> Driver)
>
>  == Console is full
> duplex
>
> == Registered channel type 'Console' (OSS Console Channel
> Driver)
>
> == Parsing '/etc/asterisk/oss.conf': Not found (No such file or
> directory)
> [chan_zap.so] => (Zapata Telephony
> w/PRI)
>
> == Parsing '/etc/asterisk/zapata.conf':
> Found
>
> DEBUG[16384]: File chan_zap.c, Line 1043 (update_conf): Updated
> conferencing on 1, with 0 conference
> users
> -- Registered channel 1, FXS Kewlstart
> signalling
>
> DEBUG[16384]: File chan_zap.c, Line 1043 (update_conf): Updated
> conferencing on 2, with 0 conference
> users
> -- Registered channel 2, FXS Kewlstart
> signalling
>
> == Registered channel type 'Zap' (Zapata Telephony Driver
> w/PRI)
>
> == Registered channel type 'Tor' (Zapata Telephony Driver
> w/PRI)
>
>  == Registered application
> 'CallingPres'
>
>  -- Registered to '172.16.0.1', who sees us as
> 172.16.255.157:4569
>
> WARNING[147466]: File chan_oss.c, Line 238 (sound_thread): Read error on
> sound device: Resource temporarily unavailable
> [pbx_config.so] => (Text Extension Configuration)
>
> ZTCFG seems OK:
>
> # ./ztcfg -vvv
>
> Zaptel Configuration
> ======================
>
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
>
> 2 channels configured.
>
>
> Zaptel.conf is blank.  Zapata.conf follows.  These were the same way
> when the older version was working:
>
> # cat zapata.conf
> [channels]
> echocancelwhenbridged=yes
> echocancel=yes
> stripmsd=1
> callerid=asreceived
> language=en
> context=incoming3121
> signalling=fxs_ks
> rxgain=3.0
> txgain=0.0
> usecallerid=yes
> group=1
> channel=1
>
>
> echocancelwhenbridged=yes
> echocancel=yes
> stripmsd=1
> usecallerid=no
> callwaiting=no
> callerid="intercom" <9876543210>
> context=incoming3130
> language=en
> signalling=fxs_ks
> group=1
> channel=2
>
>
> So, I'm wondering.
>
> 1.  What other diagnostic steps can I do to narrow this down?
> 2.  What flags/switches in Asterisk or Zaptel could be causing this,
> particularly if they've changed recently?
> 3.  Is there a 'how to diagnose zap problems' guide anywhere?
>
> Thanks.
>
> - Matt
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>