[Asterisk-Users] MP3Player problem

[Rich Adamson]

Take a look at:
 http://www.voip-info.org/wiki-Asterisk+mpg123+redhat
as there are steps for installation, and a sample CLI of a working MOH
system that might be useful.

------------------------
> I've never had both installed, but I heard that all life will cease to
> exist, or something else really bad... Can't remember exactly what it
> was ;)
> 
> But all kidding around aside, I read in one of the archives that having
> both installed kept it from working right.  So my suggestion is to
> uninstall 321.
> 
> -----Original Message-----
> Well, thx for your answer... In fact, I have the both installed !
> I don't think that it s a problem, isn't it ?
> 
> Regards,
> Areski
> 
> 
> On Thu, 2003-11-06 at 17:25, David Gomillion wrote:
> > Make sure you have mpg123 installed instead of mpg321... It's in the
> > archives somewhere... that's what fixed my install.
> > 
> > HTH,
> > David Gomillion
> > 
> > -----Original Message-----
> > Hi all,
> > 
> > 
> > Is there something wrong with MP3Player ??? I always get the message
> > below when I try to play a MP3 :
> > 
> > 
> >  -- Executing MP3Player("SIP/phone1-83f9",
> > "/var/lib/asterisk/mohmp3/02") in
> > new stack
> > WARNING[79885]: File rtp.c, Line 374 (ast_rtp_read): RTP Read error:
> > Resource temporarily unavailable
> > NOTICE[79885]: File app_mp3.c, Line 93 (timed_read): Selected timed
> > out/errored
> > out with 0
> > 
> > 
> > I already saw some old posts about it but no solutions !
> > part of an old post :
> > "I found that executing the new mpg123 with: mpg123 sample-hold.mp3 =
> > sometimes takes a couple of seconds to start playing. Every subsequent
> =
> > command (exactly the same) starts playing immediately. Maybe this
> causes
> > =
> > the timeout in *?"
> > 
> > 
> > Can anyone give me a direction to solve this problem ?
> > Thanks in advance,
> > Areski