[Asterisk-Users] MGCP Transfer problems

[Pavel Litvinenko]

Karl Putland wrote:

>On Sat, 2003-05-24 at 10:34, Jamie Carl wrote:
>  
>
>Ahhh  That's the kicker.  Same problem here.  The problem is that there
>is not enough dsp resources in the device to handle more rtp connections
>that there are ports.  So I've got the DG-104S and it supports a max of
>4 rtp streams.  I consider this issue to be a bug with the dlink
>firmware because it does not fail gracefully.  The device gets left in
>an unstable state if it runs out of dsp resources.
>
>--Karl
>  
>
It seams dg10x devices have some sort of leake of the resources ... I 
have dg104S  with just one phone connected and this error rises after 
some time of using ...

what version of firmware do you use ?

>  
>
>>Regards,
>>
>>Jamie Carl
>>Email:	me at jazz-inc.net
>>PH:		+61-414-365-466
>>
>>-----Original Message-----
>>From: Jamie Carl [mailto:me at jazz-inc.net]
>>Sent: Sunday, 25 May 2003 2:21 AM
>>To: asterisk-users at lists.digium.com
>>Subject: RE: [Asterisk-Users] MGCP Transfer problems
>>
>>
>>*This message was transferred with a trial version of CommuniGate(tm)
>>Pro*
>>*This message was transferred with a trial version of CommuniGate(tm)
>>Pro*
>>Fixed it..  You were helpful too.  I tried using 'mgcp debug' and it
>>turns out my Dlink DG102s was rejecting the call on the subchannel with
>>a 403 response which is some type of coding error.  So I put
>>'disallow=all' and 'allow=ulaw' in my mgcp.conf file and voila.
>>
>>Don't know why it was giving the 403 response.  Too tired to care.  It's
>>2:20am, it works and i'm goin to bed.
>>
>>Thanx..
>>
>>Regards,
>>
>>Jamie Carl
>>Email:	me at jazz-inc.net
>>PH:		+61-414-365-466
>>
>>-----Original Message-----
>>From: Karl Putland [mailto:karl at putland.linux-site.net]
>>Sent: Sunday, 25 May 2003 2:00 AM
>>To: asterisk-users at lists.digium.com
>>Subject: Re: [Asterisk-Users] MGCP Transfer problems
>>
>>
>>*This message was transferred with a trial version of CommuniGate(tm)
>>Pro*
>>On Sat, 2003-05-24 at 09:47, Jamie Carl wrote:
>>    
>>
>>>*This message was transferred with a trial version of CommuniGate(tm)
>>>      
>>>
>>Pro*
>>    
>>
>>>Hey all,
>>>
>>>I had this working but now I don't know what I've done to foul it up.
>>>I've been up all nite trying to figure it out and can't see what I've
>>>changed.
>>>
>>>Anywayz, I'm trying to transfer a call using hook-flash.  Mainly so I
>>>get MOH when transfering and also to announce the call.  I've got:
>>>
>>>threewaycalling = yes
>>>transfer = yes
>>>
>>>in my mgcp.conf file.  It worked for me once, but now when I
>>>      
>>>
>>hook-flash
>>    
>>
>>>on phone (A), I get MOH on the phone (B), but phone (A) gives a short
>>>low tone beep, then a short high one. ie, no dialtone.  And then it
>>>      
>>>
>>does
>>    
>>
>>>it each time I press a button on the phone.  I can hook-flash back to
>>>the conversation no problems.
>>>
>>>What am I missing here?
>>>
>>>      
>>>
>>First you need to tell us what hardware you're using.
>>Second, have you tried the transfer with mgcp debug turned on?
>>
>>--Karl
>>
>>    
>>
>>>Regards,
>>>
>>>Jamie Carl
>>>Email:	me at jazz-inc.net
>>>PH:		+61-414-365-466
>>>
>>>
>>>
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>      
>>>