[Asterisk-Users] MGCP Transfer problems

[Jamie Carl]

*This message was transferred with a trial version of CommuniGate(tm) Pro*
I'm using whatever the latest is.  Downloaded it from the DLINK website
this week.  I'll cheat and cut and past from the admin web interface of
the dg102

Boot PROM Version 1.00-B18 
Firmware Version 1.00-B39 
DSP Version Cap 0xfc1c, Rel 8.1.2.1, Build g35 , DSP C5402, Platform
VPBX/GG6E, Cap2 0x269a, Cap3 0x0, Chans 2, EC tail len 64, PCM chans 0 



Regards,

Jamie Carl
Email:	me at jazz-inc.net
PH:		+61-414-365-466

-----Original Message-----
From: Pavel Litvinenko [mailto:litw at krypton.ru]
Sent: Sunday, 25 May 2003 9:09 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] MGCP Transfer problems


*This message was transferred with a trial version of CommuniGate(tm)
Pro*
Karl Putland wrote:

>On Sat, 2003-05-24 at 10:34, Jamie Carl wrote:
>  
>
>Ahhh  That's the kicker.  Same problem here.  The problem is that there
>is not enough dsp resources in the device to handle more rtp
connections
>that there are ports.  So I've got the DG-104S and it supports a max of
>4 rtp streams.  I consider this issue to be a bug with the dlink
>firmware because it does not fail gracefully.  The device gets left in
>an unstable state if it runs out of dsp resources.
>
>--Karl
>  
>
It seams dg10x devices have some sort of leake of the resources ... I 
have dg104S  with just one phone connected and this error rises after 
some time of using ...

what version of firmware do you use ?

>  
>
>>Regards,
>>
>>Jamie Carl
>>Email:	me at jazz-inc.net
>>PH:		+61-414-365-466
>>
>>-----Original Message-----
>>From: Jamie Carl [mailto:me at jazz-inc.net]
>>Sent: Sunday, 25 May 2003 2:21 AM
>>To: asterisk-users at lists.digium.com
>>Subject: RE: [Asterisk-Users] MGCP Transfer problems
>>
>>
>>*This message was transferred with a trial version of CommuniGate(tm)
>>Pro*
>>*This message was transferred with a trial version of CommuniGate(tm)
>>Pro*
>>Fixed it..  You were helpful too.  I tried using 'mgcp debug' and it
>>turns out my Dlink DG102s was rejecting the call on the subchannel
with
>>a 403 response which is some type of coding error.  So I put
>>'disallow=all' and 'allow=ulaw' in my mgcp.conf file and voila.
>>
>>Don't know why it was giving the 403 response.  Too tired to care.
It's
>>2:20am, it works and i'm goin to bed.
>>
>>Thanx..
>>
>>Regards,
>>
>>Jamie Carl
>>Email:	me at jazz-inc.net
>>PH:		+61-414-365-466
>>
>>-----Original Message-----
>>From: Karl Putland [mailto:karl at putland.linux-site.net]
>>Sent: Sunday, 25 May 2003 2:00 AM
>>To: asterisk-users at lists.digium.com
>>Subject: Re: [Asterisk-Users] MGCP Transfer problems
>>
>>
>>*This message was transferred with a trial version of CommuniGate(tm)
>>Pro*
>>On Sat, 2003-05-24 at 09:47, Jamie Carl wrote:
>>    
>>
>>>*This message was transferred with a trial version of CommuniGate(tm)
>>>      
>>>
>>Pro*
>>    
>>
>>>Hey all,
>>>
>>>I had this working but now I don't know what I've done to foul it up.
>>>I've been up all nite trying to figure it out and can't see what I've
>>>changed.
>>>
>>>Anywayz, I'm trying to transfer a call using hook-flash.  Mainly so I
>>>get MOH when transfering and also to announce the call.  I've got:
>>>
>>>threewaycalling = yes
>>>transfer = yes
>>>
>>>in my mgcp.conf file.  It worked for me once, but now when I
>>>      
>>>
>>hook-flash
>>    
>>
>>>on phone (A), I get MOH on the phone (B), but phone (A) gives a short
>>>low tone beep, then a short high one. ie, no dialtone.  And then it
>>>      
>>>
>>does
>>    
>>
>>>it each time I press a button on the phone.  I can hook-flash back to
>>>the conversation no problems.
>>>
>>>What am I missing here?
>>>
>>>      
>>>
>>First you need to tell us what hardware you're using.
>>Second, have you tried the transfer with mgcp debug turned on?
>>
>>--Karl
>>
>>    
>>
>>>Regards,
>>>
>>>Jamie Carl
>>>Email:	me at jazz-inc.net
>>>PH:		+61-414-365-466
>>>
>>>
>>>
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>      
>>>


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users