[Asterisk-Users] fxs no dial tone on my USB device

[Steven Smith]

After letting it sit over night. It still wasn't working. Unplug the USB
connector and plugged it back in and it started working. I did that at
least 5 times last night. Thanks for the reply.



On Sun, 2003-05-18 at 00:30, Jeremy McNamara wrote:
> This is the typical problem that lots of people have with the S100U.   
> What I've done is rmmod all the modules and unplug/replug the USB 
> device, run ztcfg, then start Asterisk.  This procdure works most of the 
> time for me,  YMMV.
> 
> Jeremy McNamara
> 
> 
> Steven Smith wrote:
> 
> >My USB FXS adapter is not giving out any dialtone or ringing. I didn't
> >see a resolution to this issue.I have an email pending with support.
> >
> >If someone can forward me the resolution to this issue I would
> >appreciate it -vvvvvvvv much :) ?
> >
> >The driver loads properly but asterisk never sees it going off hook and
> >no dialtone. Asterisk also see it as an active channel - zttool shows it
> >ok.
> >
> >
> >
> >
> >On Thu, 2003-05-15 at 17:05, Martin Pycko wrote:
> >  
> >
> >>When you type "zap show channels" on the asterisk console do you see your
> >>USB channel ?
> >>
> >>Martin
> >>
> >>On 16 May 2003, Brancaleoni Matteo wrote:
> >>
> >>    
> >>
> >>>asterisk starts ok?
> >>>
> >>>matteo
> >>>
> >>>Il gio, 2003-05-15 alle 23:29, Cristian Rodriguez ha scritto:
> >>>      
> >>>
> >>>>Hello,
> >>>>
> >>>>Yes I checked the mail list archives
> >>>>Yes I have the latest CVS code
> >>>>
> >>>>I cannot get a dial tone from my USB FXS device.
> >>>>
> >>>>In my search through the list achives I found that it has been an issue with
> >>>>some others.
> >>>>
> >>>>I ensured the modules where loaded in the right order.  I managed to get
> >>>>sound when I press the keys on the phone, but still no dialtone.
> >>>>I used the astinstall script that came with my dev lite kit.  (The FXO PCI
> >>>>board is working fine)
> >>>>
> >>>>I tried unloading the modules and reloading them then ztcfg but still no
> >>>>dialtone.
> >>>>
> >>>>I am trying the install on a new box to elimitate the USB controller as one
> >>>>of the posibilities.
> >>>>
> >>>>I am using the sample configs.  Perhaps I have not setup my extensions
> >>>>properly.
> >>>>
> >>>>PII 350 64 meg ram redhat 9.0 dev lite kit. USB usb-ohci.c: usb-00:09.0,
> >>>>OPTi Inc. 82C861
> >>>>
> >>>>Can someone please help.
> >>>>
> >>>>_______________________________________________
> >>>>Asterisk-Users mailing list
> >>>>Asterisk-Users at lists.digium.com
> >>>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>        
> >>>>
> >>>_______________________________________________
> >>>Asterisk-Users mailing list
> >>>Asterisk-Users at lists.digium.com
> >>>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>
> >>>      
> >>>
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>    
> >>
> >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >  
> >
>