[Asterisk-Users] fxs no dial tone on my USB device

[Tilghman Lesher]

On Thursday 15 May 2003 16:29, Cristian Rodriguez wrote:
> Hello,
>
> Yes I checked the mail list archives
> Yes I have the latest CVS code
>
> I cannot get a dial tone from my USB FXS device.
>
> In my search through the list achives I found that it has been
> an issue with some others.
>
> I ensured the modules where loaded in the right order.  I
> managed to get sound when I press the keys on the phone, but
> still no dialtone. I used the astinstall script that came with
> my dev lite kit.  (The FXO PCI board is working fine)
>
> I tried unloading the modules and reloading them then ztcfg
> but still no dialtone.
>
> I am trying the install on a new box to elimitate the USB
> controller as one of the posibilities.
>
> I am using the sample configs.  Perhaps I have not setup my
> extensions properly.

Probably not.  Make sure that there is the line 'immediate=yes'
before the 'channel => 1' definition and 'immediate=no' before
the 'channel => 2' definition in zapata.conf.

-Tilghman