[Asterisk-Users] CallerID, DECT phones and ATA

[Andy Powell]

Hi Dan,

when you get voicemail the dial tone changes... not only that but on my dect phones
i get a little specaking face icon that flashes...

Andy

>One more question about TDM20B. How can you know when you have a new
>voicemail in your mailbox?
>On ATA, the dialtone is modulated for a couple of seconds when you pick-up
>the phone, to know that you have a voice message waiting.
>
>BR,
>Dan
>
>
>
>----- Original Message ----- 
>From: "Andy Powell" <andy at beagles-den.demon.co.uk>
>To: <asterisk-users at lists.digium.com>
>Sent: Friday, August 08, 2003 2:34 PM
>Subject: Re: [Asterisk-Users] CallerID, DECT phones and ATA
>
>
>> Hi Dan,
>>
>> I use panasonic DECT phones, when plugged into a TDM20B (2 port FXS card
>from Digium) I get caller id passed through (name AND number) although i
>can't get callerid via the pstn at the moment (located in nl) i do get it
>for VoIP calls. Plus when a pstn call comes in and there is no clid (ie all
>the time!) I force asterisk to set the caller id to "PSTN Call" <my pstn
>number>
>>
>> The panasonic was purchsed in Currys in the UK ...  personally I think
>that the panasonic's understand all eu caller id standards (I can't prove
>this) and just sell the same model throughout europe... Certainly the
>manual
>seems to cover all european languages...
>>
>> It may not be what you want to hear but I'd seriously consider getting an
>fxs card..
>>
>> Andy
>>
>> *********** REPLY SEPARATOR  ***********
>>
>> On 08/08/2003 at 13:45 Dan wrote:
>>
>> >Hi,
>> >
>> >I have two DECT cordless phones (one Philips Onis 6311 and one Philips
>> >Onis2
>> >Memo-6511).
>> >The first one is for the french standard and the second one for the
>british
>> >standard.
>> >Both of them have callerid functionality.
>> >The british one does not show anything when connected to my PSTN line.
>> >I have not yet tested the french one.
>> >What I want to do is to connect both of them to the same ATA box.
>> >There is any possibility to program callerid functionality in ATA in
>order
>> >to have different callerid standard on each port?
>> >It would be nice to use this to get callerid functionality on both
>phones,
>> >as the X100P card takes it from the PSTN line.
>> >Any hint or experience is wellcome.
>> >
>> >Thanks,
>> >Dan
>> >
>> >_______________________________________________
>> >Asterisk-Users mailing list
>> >Asterisk-Users at lists.digium.com
>> >http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users