[Asterisk-Users] CallerID, DECT phones and ATA

[Dan]

Hi Andy,

I'll try with my DECT and ATA this weekend to see if it is the same.

Thanks,
Dan
----- Original Message ----- 
From: "Andy Powell" <andy at beagles-den.demon.co.uk>
To: <asterisk-users at lists.digium.com>
Sent: Friday, August 08, 2003 5:43 PM
Subject: Re: [Asterisk-Users] CallerID, DECT phones and ATA


> Hi Dan,
>
> when you get voicemail the dial tone changes... not only that but on my
dect phones
> i get a little specaking face icon that flashes...
>
> Andy
>
> >One more question about TDM20B. How can you know when you have a new
> >voicemail in your mailbox?
> >On ATA, the dialtone is modulated for a couple of seconds when you
pick-up
> >the phone, to know that you have a voice message waiting.
> >
> >BR,
> >Dan
> >
> >
> >
> >----- Original Message ----- 
> >From: "Andy Powell" <andy at beagles-den.demon.co.uk>
> >To: <asterisk-users at lists.digium.com>
> >Sent: Friday, August 08, 2003 2:34 PM
> >Subject: Re: [Asterisk-Users] CallerID, DECT phones and ATA
> >
> >
> >> Hi Dan,
> >>
> >> I use panasonic DECT phones, when plugged into a TDM20B (2 port FXS
card
> >from Digium) I get caller id passed through (name AND number) although i
> >can't get callerid via the pstn at the moment (located in nl) i do get it
> >for VoIP calls. Plus when a pstn call comes in and there is no clid (ie
all
> >the time!) I force asterisk to set the caller id to "PSTN Call" <my pstn
> >number>
> >>
> >> The panasonic was purchsed in Currys in the UK ...  personally I think
> >that the panasonic's understand all eu caller id standards (I can't prove
> >this) and just sell the same model throughout europe... Certainly the
> >manual
> >seems to cover all european languages...
> >>
> >> It may not be what you want to hear but I'd seriously consider getting
an
> >fxs card..
> >>
> >> Andy
> >>
> >> *********** REPLY SEPARATOR  ***********
> >>
> >> On 08/08/2003 at 13:45 Dan wrote:
> >>
> >> >Hi,
> >> >
> >> >I have two DECT cordless phones (one Philips Onis 6311 and one Philips
> >> >Onis2
> >> >Memo-6511).
> >> >The first one is for the french standard and the second one for the
> >british
> >> >standard.
> >> >Both of them have callerid functionality.
> >> >The british one does not show anything when connected to my PSTN line.
> >> >I have not yet tested the french one.
> >> >What I want to do is to connect both of them to the same ATA box.
> >> >There is any possibility to program callerid functionality in ATA in
> >order
> >> >to have different callerid standard on each port?
> >> >It would be nice to use this to get callerid functionality on both
> >phones,
> >> >as the X100P card takes it from the PSTN line.
> >> >Any hint or experience is wellcome.
> >> >
> >> >Thanks,
> >> >Dan
> >> >
> >> >_______________________________________________
> >> >Asterisk-Users mailing list
> >> >Asterisk-Users at lists.digium.com
> >> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>