[Asterisk-Users] Problem -ATA-711-723-Oh323-Asterisk

[Michael Manousos]

Sip Rtp wrote:
> Hi List,
> 
> I am facing the reverse problem as stated here.I am
> using ATA 186 to make
> and recieve call to * through OH323 driver.
> When I use G711 codec in the ATA to make call then
> then as soon as i dial an
> extension the * crashes with 'segmentation fault'.

More information is needed.
You should provide a backtrace of the core file,
the screen log of Asterisk (generated when executed
with "asterisk -vvvcdg"), your oh323.conf and the important
sections of extensions.conf.

> But the same scenerio works fine when i use 723 codec
> in the ATA .I can dial
> the number and extension very well/(I have 723 support
> in the * ).
> But now problem comes in the outbound as when i use a
> extension like
> exten=>12,1,Dial(OH323/12)
> Then the call goes through but i don't hear any voice.
> So my two problems are
> 1.Why asterisk gives seg. fault when i dial exten on
> 711 codec from ATA
> 2.Why can't i hear voice from * to ATA when i use 723
> in ATA.
> for 2nd i think that there is mismatch between the
> codecs  so can we change
> the priority order of the codecs used in the * or
> Oh323 and if yes, then
> how?
> 
> Please ask if any further Input is required.
> 
> Rgds
> Manoj K Gupta
> 


Michael.