[Asterisk-Users] Multiple X100P cards

[John Vozza]

I missed the early part of this thread but did you run ztcfg after you
loaded the modules?

modprobe wcfxo
ztcfg
asterisk -vvvc

John
-------------------------------------------------------------------------
NetRom Internet Services			973-208-1339 voice
john at netrom.com					973-208-0942 fax
http://www.netrom.com
-------------------------------------------------------------------------


On Thu, 10 Apr 2003, Jim Archer wrote:

> Still no luck with the second X100P card (sigh).  I have tried various
> entries in my zapata.conf file, including:
>
>
> ;use with FXO PCI card
> signalling = fxs_ks
> txgain = 3
> channel => 1-2
>
>
> And:
>
> ;use with FXO PCI card
> signalling = fxs_ks
> txgain = 3
> channel => 1
> channel => 2
>
> And:
>
> ;use with FXO PCI card
> signalling = fxs_ks
> txgain = 3
> channel => 1
>
> signalling = fxs_ks
> txgain = 3
> channel => 2
>
>
> Here is what I get when I try to start Asterisk:
>
>
>  [chan_zap.so] => (Zapata Telephony w/PRI)
>   == Parsing '/etc/asterisk/zapata.conf': Found
> DEBUG[16384]: File chan_zap.c, Line 874 (update_conf): Updated conferencing
> on 1, with 0 conference users
>     -- Registered channel 1, FXS Kewlstart signalling
> WARNING[16384]: File chan_zap.c, Line 554 (zt_open): Unable to specify
> channel 2: No such device or address
> ERROR[16384]: File chan_zap.c, Line 4585 (mkintf): Unable to open channel
> 2: No such device or address
> here = 0, tmp->channel = 0, channel = 2
> ERROR[16384]: File chan_zap.c, Line 6154 (load_module): Unable to register
> channel '2'
> WARNING[16384]: File loader.c, Line 273 (ast_load_resource): chan_zap.so:
> load_module failed, returning -1
> WARNING[16384]: File loader.c, Line 368 (load_modules): Loading module
> chan_zap.so failed!
>
>
>
>
> --On Thursday, April 10, 2003 3:44 PM -0500 Martin Pycko
> <martinp at digium.com> wrote:
>
> > I meant zapata.conf
> >
> > Martin
> >
> > On Thu, 10 Apr 2003, Jim Archer wrote:
> >
> >> Yup, I did.  Here is the entry from zaptel.comf:
> >>
> >> group => 1
> >>
> >> fxsks=1-2
> >> fxoks=3
> >>
> >>
> >> Here is the output from zap show channels:
> >>
> >> *CLI> zap show channels
> >> Chan. Num. Extension  Context    Language   MusicOnH
> >>   1            default    en
> >>
> >>
> >> Any ideas?
> >>
> >> --On Thursday, April 10, 2003 11:13 AM -0500 Martin Pycko
> >> <martinp at digium.com> wrote:
> >>
> >> > well you have to configure zaptel.conf as well.
> >> > Also to see the zap channels you should use "zap show channels"
> >> >
> >> > Martin
> >> >
> >> > On Thu, 10 Apr 2003, Jim Archer wrote:
> >> >
> >> >> Thanks Martin, but I had no luck.  It seems that * des not know there
> >> >> is a second X100P card in the machine.  Do I need to tell the drivers
> >> >> somehow?
> >> >>
> >> >>
> >> >> *CLI> show channels
> >> >>         Channel  (Context    Extension    Pri )   State Appl.
> >> >>         Data
> >> >>
> >> >> 0 active channel(s)
> >> >>
> >> >>
> >> >>
> >> >> --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko
> >> >> <martinp at digium.com> wrote:
> >> >>
> >> >> > You configure them as usual
> >> >> >
> >> >> > zaptel.conf
> >> >> > fxoks=1-n #(n - how many cards you have)
> >> >> >
> >> >> > Then you can just plug a single phone line to each of them
> >> >> > and then in zttool which one will go into OK from RED state.
> >> >> >
> >> >> > regards
> >> >> > Martin
> >> >> >
> >> >> > On Thu, 3 Apr 2003, Jim Archer wrote:
> >> >> >
> >> >> >> Hi All...
> >> >> >>
> >> >> >> If I have more than 1 X100P card, how do I configure them so I know
> >> >> >> which one is which?
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> Asterisk-Users mailing list
> >> >> Asterisk-Users at lists.digium.com
> >> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >>
> >> >
> >> > _______________________________________________
> >> > Asterisk-Users mailing list
> >> > Asterisk-Users at lists.digium.com
> >> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>