[Asterisk-Users] Multiple X100P cards

[Jim Archer]

Thanks!  That got it!

--On Thursday, April 10, 2003 9:52 PM -0400 John Vozza <john at netrom.com> 
wrote:

> I missed the early part of this thread but did you run ztcfg after you
> loaded the modules?
>
> modprobe wcfxo
> ztcfg
> asterisk -vvvc
>
> John
> -------------------------------------------------------------------------
> NetRom Internet Services			973-208-1339 voice
> john at netrom.com					973-208-0942 fax
> http://www.netrom.com
> -------------------------------------------------------------------------
>
>
> On Thu, 10 Apr 2003, Jim Archer wrote:
>
>> Still no luck with the second X100P card (sigh).  I have tried various
>> entries in my zapata.conf file, including:
>>
>>
>> ;use with FXO PCI card
>> signalling = fxs_ks
>> txgain = 3
>> channel => 1-2
>>
>>
>> And:
>>
>> ;use with FXO PCI card
>> signalling = fxs_ks
>> txgain = 3
>> channel => 1
>> channel => 2
>>
>> And:
>>
>> ;use with FXO PCI card
>> signalling = fxs_ks
>> txgain = 3
>> channel => 1
>>
>> signalling = fxs_ks
>> txgain = 3
>> channel => 2
>>
>>
>> Here is what I get when I try to start Asterisk:
>>
>>
>>  [chan_zap.so] => (Zapata Telephony w/PRI)
>>   == Parsing '/etc/asterisk/zapata.conf': Found
>> DEBUG[16384]: File chan_zap.c, Line 874 (update_conf): Updated
>> conferencing on 1, with 0 conference users
>>     -- Registered channel 1, FXS Kewlstart signalling
>> WARNING[16384]: File chan_zap.c, Line 554 (zt_open): Unable to specify
>> channel 2: No such device or address
>> ERROR[16384]: File chan_zap.c, Line 4585 (mkintf): Unable to open channel
>> 2: No such device or address
>> here = 0, tmp->channel = 0, channel = 2
>> ERROR[16384]: File chan_zap.c, Line 6154 (load_module): Unable to
>> register channel '2'
>> WARNING[16384]: File loader.c, Line 273 (ast_load_resource): chan_zap.so:
>> load_module failed, returning -1
>> WARNING[16384]: File loader.c, Line 368 (load_modules): Loading module
>> chan_zap.so failed!
>>
>>
>>
>>
>> --On Thursday, April 10, 2003 3:44 PM -0500 Martin Pycko
>> <martinp at digium.com> wrote:
>>
>> > I meant zapata.conf
>> >
>> > Martin
>> >
>> > On Thu, 10 Apr 2003, Jim Archer wrote:
>> >
>> >> Yup, I did.  Here is the entry from zaptel.comf:
>> >>
>> >> group => 1
>> >>
>> >> fxsks=1-2
>> >> fxoks=3
>> >>
>> >>
>> >> Here is the output from zap show channels:
>> >>
>> >> *CLI> zap show channels
>> >> Chan. Num. Extension  Context    Language   MusicOnH
>> >>   1            default    en
>> >>
>> >>
>> >> Any ideas?
>> >>
>> >> --On Thursday, April 10, 2003 11:13 AM -0500 Martin Pycko
>> >> <martinp at digium.com> wrote:
>> >>
>> >> > well you have to configure zaptel.conf as well.
>> >> > Also to see the zap channels you should use "zap show channels"
>> >> >
>> >> > Martin
>> >> >
>> >> > On Thu, 10 Apr 2003, Jim Archer wrote:
>> >> >
>> >> >> Thanks Martin, but I had no luck.  It seems that * des not know
>> >> >> there is a second X100P card in the machine.  Do I need to tell
>> >> >> the drivers somehow?
>> >> >>
>> >> >>
>> >> >> *CLI> show channels
>> >> >>         Channel  (Context    Extension    Pri )   State Appl.
>> >> >>         Data
>> >> >>
>> >> >> 0 active channel(s)
>> >> >>
>> >> >>
>> >> >>
>> >> >> --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko
>> >> >> <martinp at digium.com> wrote:
>> >> >>
>> >> >> > You configure them as usual
>> >> >> >
>> >> >> > zaptel.conf
>> >> >> > fxoks=1-n #(n - how many cards you have)
>> >> >> >
>> >> >> > Then you can just plug a single phone line to each of them
>> >> >> > and then in zttool which one will go into OK from RED state.
>> >> >> >
>> >> >> > regards
>> >> >> > Martin
>> >> >> >
>> >> >> > On Thu, 3 Apr 2003, Jim Archer wrote:
>> >> >> >
>> >> >> >> Hi All...
>> >> >> >>
>> >> >> >> If I have more than 1 X100P card, how do I configure them so I
>> >> >> >> know which one is which?
>> >> >>
>> >> >>
>> >> >> _______________________________________________
>> >> >> Asterisk-Users mailing list
>> >> >> Asterisk-Users at lists.digium.com
>> >> >> http://lists.digium.com/mailman/listinfo/asterisk-users
>> >> >>
>> >> >
>> >> > _______________________________________________
>> >> > Asterisk-Users mailing list
>> >> > Asterisk-Users at lists.digium.com
>> >> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> Asterisk-Users mailing list
>> >> Asterisk-Users at lists.digium.com
>> >> http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>
>> >
>> > _______________________________________________
>> > Asterisk-Users mailing list
>> > Asterisk-Users at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users