[Asterisk-Users] Multiple X100P cards

[Martin Pycko]

well you have to configure zaptel.conf as well.
Also to see the zap channels you should use "zap show channels"

Martin

On Thu, 10 Apr 2003, Jim Archer wrote:

> Thanks Martin, but I had no luck.  It seems that * des not know there is a
> second X100P card in the machine.  Do I need to tell the drivers somehow?
>
>
> *CLI> show channels
>         Channel  (Context    Extension    Pri )   State Appl.         Data
>
> 0 active channel(s)
>
>
>
> --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko
> <martinp at digium.com> wrote:
>
> > You configure them as usual
> >
> > zaptel.conf
> > fxoks=1-n #(n - how many cards you have)
> >
> > Then you can just plug a single phone line to each of them
> > and then in zttool which one will go into OK from RED state.
> >
> > regards
> > Martin
> >
> > On Thu, 3 Apr 2003, Jim Archer wrote:
> >
> >> Hi All...
> >>
> >> If I have more than 1 X100P card, how do I configure them so I know which
> >> one is which?
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>