[Asterisk-Users] Multiple X100P cards

[Jim Archer]

Yup, I did.  Here is the entry from zaptel.comf:

group => 1

fxsks=1-2
fxoks=3


Here is the output from zap show channels:

*CLI> zap show channels
Chan. Num. Extension  Context    Language   MusicOnH
  1            default    en


Any ideas?

--On Thursday, April 10, 2003 11:13 AM -0500 Martin Pycko 
<martinp at digium.com> wrote:

> well you have to configure zaptel.conf as well.
> Also to see the zap channels you should use "zap show channels"
>
> Martin
>
> On Thu, 10 Apr 2003, Jim Archer wrote:
>
>> Thanks Martin, but I had no luck.  It seems that * des not know there is
>> a second X100P card in the machine.  Do I need to tell the drivers
>> somehow?
>>
>>
>> *CLI> show channels
>>         Channel  (Context    Extension    Pri )   State Appl.
>>         Data
>>
>> 0 active channel(s)
>>
>>
>>
>> --On Thursday, April 03, 2003 9:14 AM -0600 Martin Pycko
>> <martinp at digium.com> wrote:
>>
>> > You configure them as usual
>> >
>> > zaptel.conf
>> > fxoks=1-n #(n - how many cards you have)
>> >
>> > Then you can just plug a single phone line to each of them
>> > and then in zttool which one will go into OK from RED state.
>> >
>> > regards
>> > Martin
>> >
>> > On Thu, 3 Apr 2003, Jim Archer wrote:
>> >
>> >> Hi All...
>> >>
>> >> If I have more than 1 X100P card, how do I configure them so I know
>> >> which one is which?
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users