[asterisk-ss7] F on the end of the number

[Gustavo Mársico]

Glad to hear that.

Regards

Gustavo


On Jul 26, 2012, at 3:32 PM, Marcus Vinicius wrote:

> Hi Gustavo / Kaloyan ,
> 
> >> On Thu, 26 Jul 2012 12:54:58 -0300, Gustavo Mársico
> >> <gustavomarsico at gmail.com> wrote:
> >> I faced a similar issue recently and was related to the Screening
> >> Indicator. Was solved adding before Dial the following line:
> >>
> >> Set(CALLERPRES()=allowed) or Set(CALLERPRES()= prohib)
> >> 
> >> In both cases the important was the 2 bits saying "network provided".
> >> 
> >> Hope this helps.
> >> 
> >
> > Not sure about the Brazil variant, but ITU-T Q.764 defines the en-block
> > dialing to end with ST.
> > 0xf is ST signal it means 'end of dialing' or 'number is complete', so it
> > should understand it and your problem is probably somewhere else.
> >
> > As Johann Steinwendtner have noted you receive the number without leading
> > 0, but you send it with 0 - this or as Gustavo suggested
> > Screening/Presentation may be the problem.
> 
> Great!!!
> 
> Set(CALLERPRES()=allowed) works cooler. 
> 
>     -- Executing [0151135001019 at from-1002:2] Set("SIP/1002-00000024", "CALLERPRES()=allowed") in new stack
>     -- Executing [0151135001019 at from-1002:3] Dial("SIP/1002-00000024", "DAHDI/r3/0151135001019,40") in new stack
> [3] Len = 38 [ b1 34 23 85 99 8f dc f0 0f 00 01 00 60 01 0a 00 02 0b 09 04 10 10 15 31 05 10 10 f9 0a 07 04 13 71 53 00 01 20 00 ]
> [3] FSN: 52 FIB 0
> [3] BSN: 49 BIB 1
> [3] >[0] MSU
> [3] [ b1 34 23 ]
> [3]     Network Indicator: 2 Priority: 0 User Part: ISUP (5)
> [3]     [ 85 ]
> [3]     OPC 882 DPC 3993 SLS 15
> [3]     [ 99 8f dc f0 ]
> [3]             CIC: 15
> [3]             [ 0f 00 ]
> [3]             Message Type: IAM
> [3]             [ 01 ]
> [3]             --FIXED LENGTH PARMS[4]--
> [3]             Nature of Connection Indicator:
> [3]                     Satellites in connection: 0
> [3]                     Continuity Check: Check not required (0)
> [3]                     Outgoing half echo control device: not included (0)
> [3]                     [ 00 ]
> [3]             Forward Call Indicators:
> [3]                     Nat/Intl Call Ind: call to be treated as a national call (0)
> [3]                     End to End Method Ind: no end-to-end method(s) available (0)
> [3]                     Interworking Ind: no interworking encountered (0)
> [3]                     End to End Info Ind: no end-to-end information available (0)
> [3]                     ISDN User Part Ind: ISDN user part used all the way (1)
> [3]                     ISDN User Part Pref Ind: ISDN user part not preferred all the way (1)
> [3]                     ISDN Access Ind: originating access ISDN (1)
> [3]                     SCCP Method Ind: no indication (0)
> [3]                     [ 60 01 ]
> [3]             Calling Party's Category:
> [3]                     Category: Ordinary calling subscriber (10)
> [3]                     [ 0a ]
> [3]             Transmission Medium Requirements:
> [3]                     Speech (0)
> [3]                     [ 00 ]
> [3]             --VARIABLE LENGTH PARMS[1]--
> [3]             Called Party Number:
> [3]                     Nature of address: 4
> [3]                     NI: 0
> [3]                     Numbering plan: 1
> [3]                     Address signals: 0151135001019#
> [3]                     [ 09 04 10 10 15 31 05 10 10 f9 ]
> [3]             --OPTIONAL PARMS--
> [3]             Calling Party Number:
> [3]                     Nature of address: 4
> [3]                     NI: 0
> [3]                     Numbering plan: 1
> [3]                     Presentation: 0
> [3]                     Screening: 3
> [3]                     Address signals: 1735001002
> [3]                     [ 0a 07 04 13 71 53 00 01 20 ]
> [3]
>     -- Called DAHDI/r3/0151135001019
> [3] Len = 14 [ 34 b2 0b 85 72 43 e6 f3 0f 00 06 16 04 00 ]
> [3] FSN: 50 FIB 1
> [3] BSN: 52 BIB 0
> [3] <[0] MSU
> [3] [ 34 b2 0b ]
> [3]     Network Indicator: 2 Priority: 0 User Part: ISUP (5)
> [3]     [ 85 ]
> [3]     OPC 3993 DPC 882 SLS 15
> [3]     [ 72 43 e6 f3 ]
> [3]             CIC: 15
> [3]             [ 0f 00 ]
> [3]             Message Type: ACM
> [3]             [ 06 ]
> [3]             --FIXED LENGTH PARMS[1]--
> [3]             Backward Call Indicator:
> [3]                     Charge indicator: 2
> [3]                     Called party's status indicator: 1
> [3]                     Called party's category indicator: 1
> [3]                     End to End method indicator: 0
> [3]                     Interworking indicator: 0
> [3]                     End to End information indicator: 0
> [3]                     ISDN user part indicator: 1
> [3]                     Holding indicator: 0
> [3]                     ISDN access indicator: 0
> [3]                     Echo control device indicator: 0
> [3]                     SCCP method indicator: 0
> [3]                     [ 16 04 ]
> [3]
> Linkset 3: Processing event: ISUP_EVENT_ACM
> 
> 
> thank you so much for your help.
> 
> 
> --
> Marcus
> 
> 
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-ss7

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120726/759773cd/attachment-0001.htm>