[asterisk-ss7] F on the end of the number

[Marcus Vinicius]

Hi Gustavo / Kaloyan ,

>> On Thu, 26 Jul 2012 12:54:58 -0300, Gustavo Mársico
>> <gustavomarsico at gmail.com> wrote:
>> I faced a similar issue recently and was related to the Screening
>> Indicator. Was solved adding before Dial the following line:
>>
>> Set(CALLERPRES()=allowed) or Set(CALLERPRES()= prohib)
>> 
>> In both cases the important was the 2 bits saying "network provided".
>> 
>> Hope this helps.
>> 

>

> Not sure about the Brazil variant, but ITU-T Q.764 defines the en-block
> dialing to end with ST.
> 0xf is ST signal it means 'end of dialing' or 'number is complete', so it
> should understand it and your problem is probably somewhere else.
>
> As Johann Steinwendtner have noted you receive the number without leading
> 0, but you send it with 0 - this or as Gustavo suggested
> Screening/Presentation may be the problem.

Great!!!

Set(CALLERPRES()=allowed) works cooler. 

    -- Executing [0151135001019 at from-1002:2] Set("SIP/1002-00000024", "CALLERPRES()=allowed") in new stack
    -- Executing [0151135001019 at from-1002:3] Dial("SIP/1002-00000024", "DAHDI/r3/0151135001019,40") in new stack
[3] Len = 38 [ b1 34 23 85 99 8f dc f0 0f 00 01 00 60 01 0a 00 02 0b 09 04 10 10 15 31 05 10 10 f9 0a 07 04 13 71 53 00 01 20 00 ]
[3] FSN: 52 FIB 0
[3] BSN: 49 BIB 1
[3] >[0] MSU
[3] [ b1 34 23 ]
[3]     Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[3]     [ 85 ]
[3]     OPC 882 DPC 3993 SLS 15
[3]     [ 99 8f dc f0 ]
[3]             CIC: 15
[3]             [ 0f 00 ]
[3]             Message Type: IAM
[3]             [ 01 ]
[3]             --FIXED LENGTH PARMS[4]--
[3]             Nature of Connection Indicator:
[3]                     Satellites in connection: 0
[3]                     Continuity Check: Check not required (0)
[3]                     Outgoing half echo control device: not included (0)
[3]                     [ 00 ]
[3]             Forward Call Indicators:
[3]                     Nat/Intl Call Ind: call to be treated as a national call (0)
[3]                     End to End Method Ind: no end-to-end method(s) available (0)
[3]                     Interworking Ind: no interworking encountered (0)
[3]                     End to End Info Ind: no end-to-end information available (0)
[3]                     ISDN User Part Ind: ISDN user part used all the way (1)
[3]                     ISDN User Part Pref Ind: ISDN user part not preferred all the way (1)
[3]                     ISDN Access Ind: originating access ISDN (1)
[3]                     SCCP Method Ind: no indication (0)
[3]                     [ 60 01 ]
[3]             Calling Party's Category:
[3]                     Category: Ordinary calling subscriber (10)
[3]                     [ 0a ]
[3]             Transmission Medium Requirements:
[3]                     Speech (0)
[3]                     [ 00 ]
[3]             --VARIABLE LENGTH PARMS[1]--
[3]             Called Party Number:
[3]                     Nature of address: 4
[3]                     NI: 0
[3]                     Numbering plan: 1
[3]                     Address signals: 0151135001019#
[3]                     [ 09 04 10 10 15 31 05 10 10 f9 ]
[3]             --OPTIONAL PARMS--
[3]             Calling Party Number:
[3]                     Nature of address: 4
[3]                     NI: 0
[3]                     Numbering plan: 1
[3]                     Presentation: 0
[3]                     Screening: 3
[3]                     Address signals: 1735001002
[3]                     [ 0a 07 04 13 71 53 00 01 20 ]
[3]
    -- Called DAHDI/r3/0151135001019
[3] Len = 14 [ 34 b2 0b 85 72 43 e6 f3 0f 00 06 16 04 00 ]
[3] FSN: 50 FIB 1
[3] BSN: 52 BIB 0
[3] <[0] MSU
[3] [ 34 b2 0b ]
[3]     Network Indicator: 2 Priority: 0 User Part: ISUP (5)
[3]     [ 85 ]
[3]     OPC 3993 DPC 882 SLS 15
[3]     [ 72 43 e6 f3 ]
[3]             CIC: 15
[3]             [ 0f 00 ]
[3]             Message Type: ACM
[3]             [ 06 ]
[3]             --FIXED LENGTH PARMS[1]--
[3]             Backward Call Indicator:
[3]                     Charge indicator: 2
[3]                     Called party's status indicator: 1
[3]                     Called party's category indicator: 1
[3]                     End to End method indicator: 0
[3]                     Interworking indicator: 0
[3]                     End to End information indicator: 0
[3]                     ISDN user part indicator: 1
[3]                     Holding indicator: 0
[3]                     ISDN access indicator: 0
[3]                     Echo control device indicator: 0
[3]                     SCCP method indicator: 0
[3]                     [ 16 04 ]
[3]
Linkset 3: Processing event: ISUP_EVENT_ACM


thank you so much for your help.


--
Marcus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-ss7/attachments/20120726/80ffd648/attachment.htm>