[asterisk-ss7] libss7 loop-back possible on the same card?

[Vahan Yerkanian]

On 2/24/10 6:17 PM, Marcelo Pacheco wrote:
> That means you know next to nothing of dadhi E1 ss7.
> Then you probably shouldn't be messing with ss7/isup.
> If you can't understand the configuration, you shouldn't be following 
> somebody else's cookbook and hope everything will be fine.
> ss7/isup is a telephony network protocol, not just an end user one, 
> isn't like ISDN... It requires actual knowledge of the tecnology to 
> operate without major potential issues. It's easy to mess up...
> Sorry about the venting, I'm TIRED of all this lazy people that expect 
> free help on something they should understand themselves.
> Your reply is the same as if I offered you a script to connect ports 1 
> and 4 of a 4 span card and you have a 2 span card, and you discard the 
> tip because you can't do basic math...
>
> GOOD LUCK... YOU'LL NEED IT...
Thanks for littering the mailing list archive. I'm sure you'll get 
treated the same way some day.

If you have had spent a minute and read my chan_dahdi.conf config, you'd 
see that I'm using a similar config to yours.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20100224/60b9c18d/attachment.htm